Grinders Dry
Listings page for the selected category, need assistance? Call our advisors now...
+44 (0)1977 661 095 or Click here to ask us for additional information.
Browse our used process plant listings by sub category:
Products in Grinders Dry 72 Items
ND-14093-11
Alpine Hosokawa Air Classifier Stratoplex Type ASP 1250
Cyclone Chamber about 2600 mm dia x 3,000 mm tall with 75 kw drive motor
built 2009 Unused
Item Ref: ND-14093-11
ND-14058-11
Eldan Rapser Granulator 1,200mm Face 75 kw
Mild Steel rotor 1200 mm face with 12 flying knives & 3 static knives with a 75 kw 1440 rpm belt drive to give an output speed of 120 rpm
capacity up to about 2000 kg. Overall size about 2,600 mm x 1,700 mm x 3,000 mm tall about 7,500 kg
Item Ref: ND-14058-11
N9900-10
1200Mm Dia Sweco Vibro Energy Mill Dm10
Vibro Energy Grinder Mixer Mill 1200mm Dia X 400mm Deep With 200mm Dia Inlet. 100mm Dia Outlet. 4Kw 3 Ph Motor. Machine No. 572037.
Item Ref: N9900-10
ND-14242-11
Hosokawa Alpine Turboplex Air Classifier ATP 750-GS M/S
Hosokawa Alpine Turboplex Air Classifier ATP 750-GS is equipped
with a single wheel, driven by a 37 kW motor, capable of reaching a
rotor maximum speed of 16,000 RPM. It handles an air flow rate of 17,000
m³/h and offers particle size fineness ranging from 10 to 200 µm. Its
rated capacity is 3.9 tons per hour at 20 µm and 5.6 tons per hour at 45
µm.
| Parameter | Specification |
|---|---|
| Model | Hosokawa Alpine Turboplex Air Classifier ATP 750-GS |
| Material | Mild Steel |
| Drive Type | Single Wheel |
| Motor Power | 37 kW |
| Rotor Maximum Speed | 16,000 RPM |
| Air Flow Rate | 17,000 m³/h |
| Particle Size Fineness | 10 - 200 µm |
| Rated Capacity at 20 µm | 3.9 t/h |
| Rated Capacity at 45 µm | 5.6 t/ |
Item Ref: ND-14242-11
ND-13562-11
Christy Norris M/S Hammer mill Type X Millextra 100 /I/m 90 kw
Mild steel Swing hammer mill with 530 mm x 330 mm inlet mill body is 920 mm x 920 mm x 950 mm tall q=with 90 kw 2965 rpm direct coupled drive mounted on mild steel bed plate overall size 2,000 mm x 1,500 mm x 2,000 mm tall
Item Ref: ND-13562-11
N4925-11
Alfred Herbert 16A Attritor 55 Kw
With Internal Extraction Fans. Throughput Rating On Coal 2500 Kg Per Hour
Item Ref: N4925-11
N4843-11
Gec Dyad Hammer Mill Size 20 40/80 T/Hr
Gec Elliott Double Rotor Hammer Mill Dyad Size 20 40 To 80 Tons/Hr Limestone Feed Entrance 500mm X 610mm Each Rotor 500mm Dia Driven By 2 Off 15 Kw Motors,[ Could Take More Power.] Overall Size 2740 X 3050 X 2440 mm High. Type Jaged.
Item Ref: N4843-11
N5808-11
Alfred Herbert No 8 Attritor 30 Kw
Complete With External Fan Drier And Spares
Item Ref: N5808-11
N4376-11
Alfred Herbert No 6 Attritor
Machine No 2-55206 Coal Rating 770 K/Hr, 15 Kw Drive, Air Discharge 28 Cu.M. Per Minute.
Item Ref: N4376-11
ND-13005-11
British Rema Opposed Jet Mill M/S Model 400
Mild steel opposed jet mill chamber 800 mm dia x 1,600 mm deep with 11 kw 2880 rpm belt drive with pullies to give 3,700 rpm requires 3,400 m.cu/hour compressed air and suction fan 4,110 m.cu/hr to suit particle size 1-2 micron size. With Rotarty Classifier Wheel Overall 1,400 mm x 1,500 mm x 3,000 mm tall. with 30 kw 2,900 rpm extract All day Peacock fan rated 8,200 M.Cu/hr.
Item Ref: ND-13005-11
N5716-11
Rutsche Zuschneid Plastics Chopper 10 Kw
Twin Roller Machine Each Chamber 460 Dia. 300 mm Face
Item Ref: N5716-11
RC829E-11
Blackfriars Granulator Model 18 Ashd
Mild Steel Throat size 457 mm x 300 mm with 6 Rotor Blades and 2 static. Currently powered by a Ford Lorry Diesel Engine. Overall dimensions 1,700 mm X 3,000 mm X 1,900 mm Tall.
Item Ref: RC829E-11