New Agitator

R-B Turbine/Sawtooth Mixer 7.5 Kw Flp

New Dispersion Mixer Intended For Mobile Containers With A Dia Up To 600mm. With Max. Lift Of 1200mm. Motorised Hydraulic Lift Frame To Give A Lift Time Of Approx. 45 Seconds. Remote Control Panel Mounted Near Or On The Column With Shaft Speed Indication Stop/Start. Increase And Decrease Speed Control To Suit With Raise/Lower Hydraulic Control. Dispersion Mixer Supplied With Motor And Frequency Controller Speed Range To Give A Range Of 300-1400 Rpm And Fitted With 150mm Dia Disc Mixing Head. Mounted With A Floating Stainless Steel Lid To Suit With Inspection/Loading Hatch Stainless Steel Shaft Is Fitted With Sleeve Protection. To Allow Head To Raise/ Lower During Mix. Supplied With Fixing Device, Adjustable Safety Switches Placed On Frame So That Machine Will Stop When Turbine Head And Lid Is Raised Above The Upper Edge Of The Container And Second Safety Switch Built Into The Container Fixing Device. Motor Controller Stop/ Start And Control Panel To Be Mounted Outside The Working Area Or Outside Explosive Dangerous Area Where Applicable. With Power Pack.

R-B Turbine/Sawtooth Mixer 7.5Kw

New Dispersion Mixer Intended For Mobile Containers With A Dia Up To 600mm. With Max. Lift Of 1200mm. Motorised Hydraulic Lift Frame To Give A Lift Time Of Approx. 45 Seconds. Remote Control Panel Mounted Near Or On The Column With Shaft Speed Indication Stop/Start. Increase And Decrease Speed Control To Suit With Raise/Lower Hydraulic Control. Dispersion Mixer Supplied With Motor And Frequency Controller Speed Range To Give A Range Of 300-1400 Rpm And Fitted With 150mm Dia Disc Mixing Head. Mounted With A Floating Stainless Steel Lid To Suit With Inspection/Loading Hatch Stainless Steel Shaft Is Fitted With Sleeve Protection. To Allow Head To Raise/ Lower During Mix. Supplied With Fixing Device, Adjustable Safety Switches Placed On Frame So That Machine Will Stop When Turbine Head And Lid Is Raised Above The Upper Edge Of The Container And Second Safety Switch Built Into The Container Fixing Device. Motor Controller Stop/ Start And Control Panel To Be Mounted Outside The Working Area Or Outside Where Applicable. With Power Pack.

Rigal-Bennett Paddle Stirrer 7.5 kW

Tefc Geared Drive, 30 Rpm. Length of Stainless Steel Shaft upto 1,500 mm with Two 800 mm Dia Stainless Steel Paddles. Unit suitable for Flange Mounting. Also available at 100 Rpm with Two 400 mm Dia Paddles.  Additional Spec at Extra Cost.

Rigal-Bennett Paddle Stirrer 7.5 kW Flp

Geared Drive 30 Rpm. Length of Stainless Steel Shaft up to 1,500 mm with Two 800 mm Dia Stainless Steel Paddles. Unit suitable for Flange Mounting. Also available at 100 Rpm with Two 400 mm Dia Paddles.  Additional Spec at Extra Cost.

Rigal Bennett Paddle Stirrer 7.5Kw Air

Geared Drive Variable Air Powered Drive 100 To 500 Rpm Length Of Stainless Steel Shaft Up To 1500mm With Two 800 mm Dia Stainless Steel Paddles. Unit Suitable For Flange Mounting.

Rigal-Bennett Saw Tooth Mixer, 7.5 kW

New Dispersion Mixer with 2,880 Rpm Drive. 150mm Dia Disc Mixing Head with Serrated Edge Suitable for Mixing In Vessels 3/600mm Dia and Depth. All S/S Contact Parts. Shafts Over 1,100mm Long Fitted with Bearing In Bell Housing.

Rigal Bennett Saw Tooth Mixer 7.5 kW

New Dispersion Mixer with Variable Speed 630/2880 Rpm Drive. 150mm Disc Mixing Head with Serated Edge Suitable for Mixing 3/600mm Dia & Depth. All Stainless Steel Contact Parts. Shafts Over 1,100mm Long Fitted with Bearing In Bell Housing

Rigal Bennett Saw Tooth Mixer 7.5 kW Flp

New Dispersion Mixer with Variable Speed 630/2,880 Rpm Drive. 150mm Disc Mixing Head with Serated Edge Suitable for Mixing 3/600mm Dia & Depth.  All Stainless Steel Contact Parts.  Shafts Over 1,100mm Long Fitted with Bearing In Bell Housing

Rigal-Bennett Saw Tooth Mixer 7.5 kW, Flp

New Dispersion Mixer with 2,880Rpm Flameproof Drive. 150mm Dia Disc Mixing Head with Serrated Edge Suitable for Mixing In Vessels 3/600mm Dia and Depth. All S/S Contact Parts. Shafts Over 1,100mm Long Fitted with Steady Bearing.

Rigal-Bennett Turbine Stirrer 7.5 kW

Rigal-Bennett Turbine Stirrer 7.5 kW Flp

Geared Drive between 200 and 400 Rpm.  Length of Stainless Steel Shaft to suit tank.  400 mm Dia Stainless Steel Turbine Disc Unit suitable for Flange Mounting.  Also available on 720 Rpm Motor Unit.

7.5 kW Variable Frequency Inverter