New Agitator
Listings page for the selected category, need assistance? Call our advisors now...
+44 (0)1977 661 095 or Click here to ask us for additional information.
Browse our new process plant listings by sub category:
- Axial Tube Dissolver Stirrer
- Bottom entry Shearhead Stirrer
- Clamp On Geared Stirrer
- Clamp On Stirrer
- Combination Mixers
- Continuous Inline Powder Liquid Mixer
- Contra Rotating Scraped
- Dispersion Mixer
- Dispersion mixer raise/lower TMH range
- Drum/IBC Medium Viscosity Mixers
- Drum/IBC Mixers
- Duplex Disintegrator Dissolver High Shear Mixer
- Geared Drum/IBC Mixers
- Inline Continuous Stirrer
- Lab Pilot - Combination Mixers
- Lab Pilot - Sawtooth Dispersion Mixers
- Lab Pilot - Shearhead Mixers
- Lab Pilot - Trifoil Mixers
- Lab Pilot - Turbine Mixers
- Liquiverter Mixer
- Medium speed Mixer
- Medium-Variable speed Mixer
- Scraped Surface Mixers
- Shear Head Stirrer
- Shearhead Duplex Stirrer
- Side & Bottom entry Stirrer
- Slow Speed Mixer
- Slow-Variable Speed Mixer
- Special one of items
- Variable Frequency Inverters
Products in New Agitator 476 Items
AT183-63
R-Bennett 18.5Kw Tubular Vortex Stirrer
3 Phase 960 Rpm With All Stainless Steel Contact Parts. Length Of Shaft To Suit Tank. Unit Flange Mounted.
Item Ref: AT183-63
EHDH-12724-63
R&B Duplex Shearhead Mixer 18.5 kW
Standard 3 Phase 2,880 Rpm Drive General Purpose Duplex Shearhead 130 mm Dia Stainless Steel Contact Parts. Mounted in Mild Steel Bell Housing to suit. To be supplied without a bottom steady bearing with flange mount. Shaft Length is 1,450 mm. [Intermediate Propeller can be Specified at Extra Cost.]
Item Ref: EHDH-12724-63
EHDH-12725-63
R&B Duplex Shearhead Mixer 18.5 kW Flp
Standard 3 Phase 2,880 Rpm Drive Flp. General Purpose Duplex Shearhead 130 mm Dia Stainless Steel Contact Parts. Mounted in Mild Steel Bell Housing to suit to be supplied without a Bottom Steady Bearing with Flange Mount. Shaft length is 1,150 mm. [Intermediate Propeller can be Specified at Extra Cost.]
Item Ref: EHDH-12725-63
TMH18F-63
R-B Turbine/Sawtooth Mixer 18.5Kw Flp
New Dispersion Mixer Intended For Mobile Containers With A Dia Up To 1200mm. With Max. Lift Of 1400mm. Motorised Hydraulic Lift Frame To Give A Lift Time Of Approx. 45 Seconds. Remote Control Panel Mounted Near Or On The Column With Shaft Speed Indication Stop/Start. Increase And Decrease Speed Control To Suit With Raise/Lower Hydraulic Control. Dispersion Mixer Supplied With Motor And Frequency Controller Speed Range To Give A Range Of 300-1400 Rpm And Fitted With 300mm Dia Disc Mixing Head. Mounted With A Floating Stainless Steel Lid To Suit With Inspection/Loading Hatch Stainless Steel Shaft Is Fitted With Sleeve Protection. To Allow Head To Raise/ Lower During Mix. Supplied With Fixing Device, Adjustable Safety Switches Placed On Frame So That Machine Will Stop When Turbine Head And Lid Is Raised Above The Upper Edge Of The Container And Second Safety Switch Built Into The Container Fixing Device. Motor Controller Stop/ Start And Control Panel To Be Mounted Outside The Working Area Or Outside Explosive Dangerous Area Where Applicable. With Power Pack.
Item Ref: TMH18F-63
TMH183-63
R-B Turbine/Sawtooth Mixer 18.5Kw
New Dispersion Mixer Intended For Mobile Containers With A Dia Up To 1200mm. With Max. Lift Of 1400mm. Motorised Hydraulic Lift Frame To Give A Lift Time Of Approx. 45 Seconds. Remote Control Panel Mounted Near Or On The Column With Shaft Speed Indication Stop/Start. Increase And Decrease Speed Control To Suit With Raise/Lower Hydraulic Control. Dispersion Mixer Supplied With Motor And Frequency Controller Speed Range To Give A Range Of 300-1400 Rpm And Fitted With 300mm Dia Disc Mixing Head. Mounted With A Floating Stainless Steel Lid To Suit With Inspection/Loading Hatch Stainless Steel Shaft Is Fitted With Sleeve Protection. To Allow Head To Raise/ Lower During Mix. Supplied With Fixing Device, Adjustable Safety Switches Placed On Frame So That Machine Will Stop When Turbine Head And Lid Is Raised Above The Upper Edge Of The Container And Second Safety Switch Built Into The Container Fixing Device. Motor Controller Stop/ Start And Control Panel To Be Mounted Outside The Working Where Applicable. With Power Pack.
Item Ref: TMH183-63
TV18F-63
Rigal Bennett Saw tooth Mixer 18.5 kW Flp
New Dispersion Mixer with Variable Speed 18.5 kW 300-28700 Rpm Flp Drive. 250mm Dia Disc Mixing Head with Serrated Edge suitable for Mixing In Vessels 6-1,200mm Dia and Depth. All S/S Contact Parts. Unit Flange Mounted In M/S Bell Housing.
Item Ref: TV18F-63
TV183-63
R-B Sawtooth Mixer 18.5 kW
New Dispersion Mixer with Variable Speed 300-1,400 Rpm Drive. 300mm Dia Disc Mixing Head with Serrated Edge Suitable for Mixing In Vessels 6-1,200mm Dia and Depth. All S/S Contact Parts. Unit Flange Mounted In M/S Bell Housing.
Item Ref: TV183-63
TH183-63
Rigal-Bennett Saw Tooth Mixer 18.5 kW
New Dispersion Mixer with 1,440 rpm Drive. 300mm Dia Disc Mixing Head with Serrated Edge suitable for Mixing In Vessels 6/1,200 mm Dia and Depth.
All Stainless Steel Contact Parts. Unit Flange Mounted In Mild Steel Bell Housing
Item Ref: TH183-63
TH18F-63
Rigal-Bennett Saw Tooth Mixer 18.5 kW, Flp
New Dispersion Mixer with 1,440 rpm Flameproof Drive. 300mm Dia Disc Mixing Head with Serrated Edge suitable for Mixing in Vessels 6/1,200mm Dia and Depth.
All Stainless Steel Contact Parts. Unit Flange Mounted In Mild Steel Bell Housing
Item Ref: TH18F-63
FI185-63
18.5 Kw Variable Frequency Inverter
400/440/3/50 Input, 400/440/3/Variable Output, Constant 39 Amp Current. [ Price Quoted Is For Inverter Only. At Extra Cost We Are Able To Offer Control Panel To Suit Your Specific Application Upon Request.]
Item Ref: FI185-63
E1853-63
Rigal-Bennett Shearhead Mixer 18.5 kW 3 Ph
Standard 3 Phase 1,440 rpm Drive General Purpose Shearhead 150mm Dia Stainless Steel Contact Parts. Mounting by Flange or Suspending Hook can be selected.
Shaft Length is standard 750mm. With High Shear Agitation to get the right blend.
But other Lengths and Intermediate Propeller can be specified at Extra Cost.
Item Ref: E1853-63
E185F-63
Rigal-Bennett Shearhead Mixer 18.5 kW, Flp
Flameproof 3 Phase 1,440 rpm General Purpose Shearhead 150mm Dia Stainless Steel Contact Parts. Mounting by Flange or Suspending Hook can be selected.
Shaft Length is Standard 750mm. With High Shear Agitation to get the right blend. But other lengths and Intermediate Propeller can be specified at Extra Cost.
Item Ref: E185F-63