New Agitator
Listings page for the selected category, need assistance? Call our advisors now...
+44 (0)1977 661 095 or Click here to ask us for additional information.
Browse our new process plant listings by sub category:
- Axial Tube Dissolver Stirrer
- Bottom entry Shearhead Stirrer
- Clamp On Geared Stirrer
- Clamp On Stirrer
- Combination Mixers
- Continuous Inline Powder Liquid Mixer
- Contra Rotating Scraped
- Dispersion Mixer
- Dispersion mixer raise/lower TMH range
- Drum/IBC Medium Viscosity Mixers
- Drum/IBC Mixers
- Duplex Disintegrator Dissolver High Shear Mixer
- Geared Drum/IBC Mixers
- Inline Continuous Stirrer
- Lab Pilot - Combination Mixers
- Lab Pilot - Sawtooth Dispersion Mixers
- Lab Pilot - Shearhead Mixers
- Lab Pilot - Trifoil Mixers
- Lab Pilot - Turbine Mixers
- Liquiverter Mixer
- Medium speed Mixer
- Medium-Variable speed Mixer
- Scraped Surface Mixers
- Shear Head Stirrer
- Shearhead Duplex Stirrer
- Side & Bottom entry Stirrer
- Slow Speed Mixer
- Slow-Variable Speed Mixer
- Special one of items
- Variable Frequency Inverters
Products in New Agitator 476 Items
FI220-63
22 kW Variable Frequency Inverter
400/440/3/50 Input, 400/440/3/Variable Output, Constant 49 Amp Current. [Price quoted is for Inverter Only. At extra cost we are able to offer Control Panel to suit your Specific Application upon request.]
Item Ref: FI220-63
TV22F-63
Rigal Bennett Saw tooth Mixer 22 kW Flp
New Dispersion Mixer with Variable Speed 22 kW Flp 400/2,870 Rpm Drive. 300mm Dia Disc Mixing Head with Serrated Edge Suitable for Mixing In Vessels 8/1,600mm Dia and Depth. All Stainless Steel Contact Parts. Unit Flange Mounted In Mild Steel Bell Housing
Item Ref: TV22F-63
TMH223-63
R&B Turbine/Sawtooth Mixer 22Kw
New Dispersion Mixer Intended For Mobile Containers With A Dia Up To 1200mm. With Max. Lift Of 1400mm. Motorised Hydraulic Lift Frame To Give A Lift Time Of Approx. 45 Seconds. Remote Control Panel Mounted Near Or On The Column With Shaft Speed Indication Stop/Start. Increase And Decrease Speed Control To Suit With Raise/Lower Hydraulic Control. Dispersion Mixer Supplied With Motor And Frequency Controller Speed Range To Give A Range Of 300-1400 Rpm And Fitted With 400mm Dia Disc Mixing Head. Mounted With A Floating Stainless Steel Lid To Suit With Inspection/Loading Hatch Stainless Steel Shaft Is Fitted With Sleeve Protection. To Allow Head To Raise/ Lower During Mix. Supplied With Fixing Device, Adjustable Safety Switches Placed On Frame So That Machine Will Stop When Turbine Head And Lid Is Raised Above The Upper Edge Of The Container And Second Safety Switch Built Into The Container Fixing Device. Motor Controller Stop/ Start And Control Panel To Be Mounted Outside The Working Area Or Outside Explosive Dangerous Area Where Applicable. With Power Pack.
Item Ref: TMH223-63
TMH22F-63
R&B Turbine/Sawtooth Mixer 22Kw Flp
New Dispersion Mixer Intended For Mobile Containers With A Dia Up To 1200mm. With Max. Lift Of 1400mm. Motorised Hydraulic Lift Frame To Give A Lift Time Of Approx. 45 Seconds. Remote Control Panel Mounted Near Or On The Column With Shaft Speed Indication Stop/Start. Increase And Decrease Speed Control To Suit With Raise/Lower Hydraulic Control. Dispersion Mixer Supplied With Motor And Frequency Controller Speed Range To Give A Range Of 300-1400 Rpm And Fitted With 400mm Dia Disc Mixing Head. Mounted With A Floating Stainless Steel Lid To Suit With Inspection/Loading Hatch Stainless Steel Shaft Is Fitted With Sleeve Protection. To Allow Head To Raise/ Lower During Mix. Supplied With Fixing Device, Adjustable Safety Switches Placed On Frame So That Machine Will Stop When Turbine Head And Lid Is Raised Above The Upper Edge Of The Container And Second Safety Switch Built Into The Container Fixing Device. Motor Controller Stop/ Start And Control Panel To Be Mounted Outside The Working Area Where Applicable. With Power Pack.
Item Ref: TMH22F-63
E2203-63
Rigal-Bennett Shearhead Mixer 22 kW, 3 Ph.
Standard 3 Phase 960 Rpm Drive General Purpose Shearhead 180 mm Dia Stainless Steel Contact Parts. Mounting by Flange or Suspending Hook can be selected. Shaft Length is Standard 750 mm. With High Shear Agitation to get the right blend. But other Lengths and Intermediate Propeller can be specified At Extra Cost.
Item Ref: E2203-63
E220F-63
Rigal-Bennett Shearhead Mixer 22 kW, Flp
Flameproof 3 Phase 960 Rpm General Purpose Shearhead 180 mm Dia Stainless Steel Contact Parts. Mounting by Flange or Suspending Hook can be selected. Shaft Length is standard 750 mm. With High Shear Agitation to get the right blend. But other Lengths and Intermediate Propeller can be specified At Extra Cost.
Item Ref: E220F-63
EL223-63
R-B Inline Shearhead Mixer 22 kW
Continuous Mixer with standard 3 pH. 2,880 rpm drive chamber with General Purpose Shearhead Screen complete with Mechanical Seal or Packed Gland. Inlet & Outlet connections 75 M/M Flanged. All Contact Parts 316 Grade S/S. {Please note the price with Mechanical Seal. A Packed Gland Seal could be supplied with a Saving Price Quoted.}
Item Ref: EL223-63
EL22F-63
R-B Inline Shearhead Mixer 22 kW Exp
Mono Block Design Foot Mounted with Explosion Proof 3 Ph 2,880 Rpm Drive. Chamber with General Purpose Shearhead Screen complete with Mechanical Seal or Packed Gland. Inlet & Outlet Conns. 75 M/M Flanged. All contact parts 316 Grade S/S. {Please Note the price with Mechanical Seal. A Packed Gland Seal could be supplied with A Saving Price Quoted.}
Item Ref: EL22F-63
TH223-63
Rigal-Bennett Saw Tooth Mixer 22 kW
New Dispersion Mixer with 1,440 rpm Drive. 300 mm Dia Disc Mixing Head with Serrated Edge Suitable for Mixing In Vessels 8/1,600 mm Dia and Depth. All Stainless Steel Contact Parts. Unit Flange Mounted In Mild Steel Bell Housing
Item Ref: TH223-63
TH22F-63
Rigal Bennett Sawtooth Mixer 22 kW Flp
New Dispersion Mixer with 1,440 rpm Drive. 300mm Dia Disc Mixing Head with Serrated Edge suitable for Mixing in vessels 8/1600mm dia and depth.
All Stainless Steel Contact Parts. Unit Flange Mounted in Mild Steel Bell Housing
Item Ref: TH22F-63
COB-13345-63
20 L R&B ELEC COMBINATION VAC MIXER FLP
Stainless
Steel Rigal Bennett Combination Vacuum Mixer with Stainless Steel
Vacuum Lid with clamps to
suit lifter. With centre mounted 0.37 KW 218 RPM FLP Trifoil or Anchor Scraped
Paddle Stirrer profile to suit Combination with PTFE hinged scrapers and
off center 2.2 Kw 2880 Rpm FLP R-B Sawtooth mixer with 100 mm Dia
Sawtooth Disc head . Each mounted on bell housing with
bearing and packed gland seals to suit vacuum duty. With Stainless
steel Dished lid with charge port type inspection glass, 2
off 38 mm dia inlets and 2 off 25 mm dia inlet fittings to suit. Stainless steel JKTD portable Vacuum bowl 320 mm dia x 380 mm deep with dish bottom with 50 mm dia outlet mounted on legs to give 400 mm ground clearance
Mounted on heavy duty motorised hydraulic floor mounted Raise/lower stand with raise lower control and hand operated safety pins to put in place when up, unit to be mounted on mild steel base overall size 1350mm x 1350mm x 2,950 mm tall of floor space.
Wall
mounted Mild Steel Powder Coated control cabinet to be located in a safe area.
to suit Raise lower mixer, lid and Tank. Each mixer to have start/stop
Control light indication when on. each stirrer to have Inverter control
from panel with door mounted digital readout and speed control. Safety circuit to suit.
Extra features can be supplied on request at extra cost.
Item Ref: COB-13345-63
DDDHS-1853-63
Rigal Bennett Duplex Disintegrator Dissolver High Shear Mixer 18.5 Kw
New 18.5 kw Standard 3 Phase 1,440 Rpm Drive with intermediate Impeller, Vertical Cutter Disintegrator, With Base Mounted Slotted Duplex Shearhead 130 mm Dia Stainless Steel Shaft Length is 2,250 mm. Stainless Steel 316 Grade Contact Parts. Mounted in Mild Steel Bell Housing to suit with mount flange to suit Bridge or Lid.
The Rigal Bennett Duplex Disintegrator Dissolver High Shear Mixer has the following key specifications:
- Power: 18.5 kW (kilowatt) motor.
- Drive: Standard 3-phase motor running at 1,440 RPM.
- Impeller: Intermediate impeller.
- Cutter: Vertical cutter disintegrator.
- Shearhead: Base-mounted slotted duplex shearhead with a diameter of 130 mm.
- Shaft: Stainless steel shaft, 2,250 mm long, made from 316-grade stainless steel, suitable for contact with various materials.
- Mounting: Mounted in a mild steel bell housing with a flange designed to fit a bridge or lid.
Item Ref: DDDHS-1853-63