Plastic Rubber

Mild steel chamber 500mm dia x 1100mm deep with 300 mm deep cone to 60mm dia outlet. 70mm dia inlet, 2 off side sight glasses. with extract fan and heat source up to 200deg.c 1500mm x 1760mm x 2150mm tall.

Mild steel 4 bladed fixed beater mill 200mm dia rotor x 50mm face. with 150mm x 70mm inlet with 170mm dia outlet mounted on a trolley frame to give about 800mm ground clearance. with 3 kw 1440 rpm direct drive motor. overall size 500mm x 900mm x 1300mm tall

Mild Steel Chamber 400 mm dia x 740mm on the straight. Cone base with blower fan controller. 10.5 Kw 3 phase temp range 60 to 120 deg.c. Model MDD120 code 8SIT.  Mounted on portable trolley frame.  Overall size 600mm x 1000mm x 1600mm tall

Mild Steel Twin Screw Counter Rotating Extruder 80mm Dia x 570mm long with 3 off Jacket zones with 60L feed hopper 570mm x 690mm x 550mm deep, with 0.5 to 38.1 kW variable speed approx 10 to 22 rpm.

Overall size 1,000mm x 3,300mm x 1,950mm tall.

With 50mm Dia x 150mm Face Rolls mounted in structure 800mm x 650mm x 1250mm tall

Mild Steel Extruder - Injection Moulder with 10L feed hopper 400mm x 280mm x 220mm deep 40mm Dia x 800mm extruder to 150mm x 150mm vertical mould platens with 400mm of stroke.  Overall size 1700mm x 950mm x 1250mm tall  

Single Screw Extruder with 32mm dia x 1000mm long auger 24 to 1 ratio with 5 off heated zones with hydraulic drive motor twin roll puller. Overall size 1900mm x 700mm x 1800mm tall 1000mm x 700mm x 1800mm tall with original control panel.

Stainless Steel Extruder 25mm dia x 450mm long with 4 zone electric heat source with variable 0 to 25 RPM geared drive. With 100mm x 100mm x 900mm long water cooler trough to a 50mm wide x 550mm belt puller with 0.75 kw Carter variable 0 to 25 rpm drive. Overall size 450mm x 750mm x 800mm tall