Pin, Disc & Cone Mills
ND-14242-11
Hosokawa Alpine Turboplex Air Classifier ATP 750-GS M/S
Hosokawa Alpine Turboplex Air Classifier ATP 750-GS is equipped
with a single wheel, driven by a 37 kW motor, capable of reaching a
rotor maximum speed of 16,000 RPM. It handles an air flow rate of 17,000
m³/h and offers particle size fineness ranging from 10 to 200 µm. Its
rated capacity is 3.9 tons per hour at 20 µm and 5.6 tons per hour at 45
µm.
| Parameter | Specification |
|---|---|
| Model | Hosokawa Alpine Turboplex Air Classifier ATP 750-GS |
| Material | Mild Steel |
| Drive Type | Single Wheel |
| Motor Power | 37 kW |
| Rotor Maximum Speed | 16,000 RPM |
| Air Flow Rate | 17,000 m³/h |
| Particle Size Fineness | 10 - 200 µm |
| Rated Capacity at 20 µm | 3.9 t/h |
| Rated Capacity at 45 µm | 5.6 t/ |
Item Ref: ND-14242-11
ND-13005-11
British Rema Opposed Jet Mill M/S Model 400
Mild steel opposed jet mill chamber 800 mm dia x 1,600 mm deep with 11 kw 2880 rpm belt drive with pullies to give 3,700 rpm requires 3,400 m.cu/hour compressed air and suction fan 4,110 m.cu/hr to suit particle size 1-2 micron size. With Rotarty Classifier Wheel Overall 1,400 mm x 1,500 mm x 3,000 mm tall. with 30 kw 2,900 rpm extract All day Peacock fan rated 8,200 M.Cu/hr.
Item Ref: ND-13005-11
N9291-11
Kek Universal Mill Size 3H Mild Steel
Mild Steel Universal Fine Grinding Mill Unit With Magnetic Feed Chute To Centre Feed With Turbo Type Mill. Driven By 18.5Kw Belt Drive. Overall Size 700mm X 2000mm X 1100mm Tall. Machine No. 4404 3Hpl 39250.
Item Ref: N9291-11
ND-12651-11
Hosokawa Alpine Spiral Fluid Energy Jet Mill Type AS Aeroplex Type 315AS
Stainless Steel Vertical housing with 315 mm dia Grind zone chamber with no moving parts 40 mm - 20 mm dia Venturi Powder feed plus 15 off adjustable air feed nozzles with PTFE liner
Item Ref: ND-12651-11
N9897-11
Sturtevant 225 Mm Disc Grinder 2.2 Kw
Mild Steel Cast Iron With Carborundum Disc 250mm Dia Mill With 55mm X 40mm Inlet Feed 2.2 Kw 1440 Rpm V Belt Drive. Bed Plate Mounted,
Item Ref: N9897-11
N7839-11
Alpine M/S Forplex Mill Type B250u
Mild Steel Mill, Universal Mill Forplex Type Rotor And Stator. 11 Kw 6300 Rpm Drive. No 16560. Mounted On Bed Plate As A Complete System With Vibro Feeder & Hopper To Mill With Hopper Discharge. Mounted With Dust Collection Socks.
Item Ref: N7839-11
N4787-11
Sturtevant 225 Mm Disc Grinder 2.2 Kw
Machine No 792107 & 792109 2.2 Kw 1440 Rpm V Belt Drive. Bed Plate Mounted,
Item Ref: N4787-11
N7398-11
Pascall Cone Mill No. 20807 3 Hp Drive
With Mild Steel Cones, Rotor Cone With Vernier Calibration. 205 mm Dia. Cones With Vibrator Feed And 3 Hp Belt Drive.
Item Ref: N7398-11
N2619-11
Cone Disc Mills M/S 1.1 Kw
Italian Manufacture,Coned 200 mm Disc With Hopper Feed, Mounted On Pedestal With Height Adjustment,Fitted On Castors
Item Ref: N2619-11
N10208-11
S/S Micronizer Fluid Energy Mill Size 4
Stainless Steel Fluid Energy Classifier Mill With 100mm Dia Chamber. Output 2/5 K/H. Produces Materials Of 5 Micron & Below. Grinding By Attrition With Compressed Air.
Item Ref: N10208-11
RC1367-11
Engug M/S cone mill 75Kw
Mild steel cone mill with approx. 700mm dia Rotor with water cooling and manual gap adjustment. with 75 kw 960 RPM belt drive to give about 250 RPM, Overall size 3500mm x 1500mm x 1900mm Tall.
Item Ref: RC1367-11
ND-14064-11
Hosokawa Micron 5 CMT Mill S/S Air Classifying Mill
Stainless Steel Air Classifying Dynamic Classifier Mill Head.
Supplied With product feeder, two stage cyclone and extraction fan.
Unused since last full service.
Manufactured by Hosokawa.
Model: 5 CMT Mill
Item Ref: ND-14064-11
ND-11987-11
Hosokawa Micron Grinder Classifier Drier S/S JKTD Type MDV - 4
Stainless Steel Rotary Grinder Classifier Rotary Drier chamber about 910mm dia x 3,500mm deep with 45 kW 1,500 rpm belt drive rotor motor and 3.7 kW 1,300 rpm. Previous duty on flour Classifier max Air input temperature 450 deg. C, air capacity 100 to 200 Meters cu/min. Max evaporation 1,200 kg/hr of water. Overall size 2,200mm x 1,450mm x 4,500mm tall
Item Ref: ND-11987-11