Extruder
N8742-09
Oakes Continuous Mixer Model 8D/45/6
Stainless Steel 200mm Dia X 1740mm Long With Interrupted Flights And Static Teeth Plates. Jacketed For 730mm With 200mm Dia Inlet And 200mm X 300mm Outlet. Overall Size 1100mm X 3600mm X 2000mm Tall With 13/41Kw 1440/480 Rpm Ac Comutator Variable Speed Gear Drive. Made By E.T. Oakes Corp
Item Ref: N8742-09
N9301-24
Twin Screw Baker Perkins Mixer/Extruder
Stainless Steel Jacketed. Main Rotor Mixer 170mm Dia X 1800mm Long . Chamber Dims 340mm Wide X 180mm Tall X 1800mm Long. 5.5Kw 74 Rpm Gear Drive To Twin Screw Cross Feed Extruder Head Mounted At 90 Degrees With 70mm Dia X 850mm Long Rotors. Chamber 140mm Wide X 70mm Deep X 850mm Long With 0.75Kw 103 Rpm Drive. Unit With 180mm X 200mm Inlet And 100mm Dia Outlet. Jacket W.P. 35 Psi. T.P. 50 Psi. Overall Size 3200mm X 1300mm X 1150mm Tall.
Item Ref: N9301-24
N9517-09
Nuova Euromec Twin Screw Extruder 70/Fs
Stainless Steel body with Nylon Twin Screws 160mm dia X 1,000mm Long. Fed by 2 Off 110mm dia X 400mm Face Cutter Rotors to Feed Main Extruder. Driven by 35 kW drive. Water Cooled Jacket with 150mm X 100mm Cutter. Unit currently fitted with a 90mm X 45mm dischargeplate.
Overall size 2,400mm X 1,400mm X 1,750mm Tall.
Item Ref: N9517-09
N6832-09
Extrud-O-Mix M/S Jktd 150 Dia X 460Mm
Mild Steel Single Screw Mixer Extruder 150 mm Dia X 460mm Long Screw, 75 X 100 mm Feed Port With 7.5Kw Drive Motor.
Item Ref: N6832-09
ND-13507-09
BCH JKTD Horizontal Auger Screw Extruder 120 mm dia x 2000 mm long
Stainless
Steel Jacketed Horizontal Auger Single Screw Extruder 120 mm dia x
2,000 mm long with side extrusion plate 610 mm x 60 mm. Inlet 300 mm x
300 mm with aprox 15 kw variable speed drive 10 to 140 rpm mounted on
trolley base. Overall size 2,400 mm x 1,800 mm x 1,800 mm tall
Item Ref: ND-13507-09
ND-13647-09
Samfull S/S extruder with horizontal form fill and sealer
Stainless
Steel extruder 120 mm dia x 660 mm long with 2 off horizontal feed
rolls about 65 mm dia x 660 mm long with extruder die head to feed
horizontal form fill and sealer set up to fill 90 to 110 mm wide x 150
mm to 200mm long sachets overall size of machine 1,100 mm x 4,500 mm x
1,500 mm tall
Item Ref: ND-13647-09
RC1328-09
Gladstone SS Super Pugmill Extruder G75
Stainless Steel Jacketed Superpug Mill Designed to Masticate and Extrude Product Chamber 2 Off 75 mm Dia Augers X 750 mm Long Chamber Feed 250 mm X 150 mm with 60 mm Dia Discharge Point to fit Extruder Profile. Adjustable Heat Source to Both Extruder Body and Discharge Cone with 5.5 kW 18 Rpm Geared Drive Motor with Inverter Speed Control. Overall size of unit 750 mm X 1,800 mm X 1,700 mm Tall.
Item Ref: RC1328-09