Plant Refurbishment

ND-13684-24

1700L Renatto Mazzetti Fat Melter Elec

Stainless Steel inner chamber 1,400mm x 1,000mm x 1,1250 mm deep, with Interrupted ribbon type stirrer with 1.1 kw geared drive about 20 rpm inside Double jacketed,Electric heating about 6 kw , overall size 2,200 mm x 1,460mm x 1,550mm tall

Item Ref: ND-13684-24

Details

ND-11628-24

Andritz S/S Coater COT 15

Stainless Steel coater about 1000mm dia x 2500mm long drum with 1.1 kw geared drive mounted in a frame 2500mm x 1250mm x 1450mm Tall

Item Ref: ND-11628-24

Details

ND-13683-24

500L Chocolate Temperer Renatto Mazzetti TAO 500

Stainless Steel Chocolate Temperer Manufacturer Renatto Mazzetti Type TAO 500
Capacity approx. 500Kg

Item Ref: ND-13683-24

Details

ND-12737-24

3 Roll Chocolate Pre Refiner Mill

With Steel Cast Iron Rolls 400 mm dia x 1,000 mm face with hydraulic adjustable rolls with cored rolls for heating or cooling

Item Ref: ND-12737-24

Details

ND-13515-24

Hecomatic S/S Coater -Deduster Plastic Belt 370 mm x 1,600 mm long

With Plastic belt 370 mm wide x 1,600 mm long mounted 1,250 mm high over a stainless steel trough spray 19 mm dia spray manifold above and below the conveyor belt with Staimless Steel hood with 200 mm dia in/outlet connections overall size 700 mm x 2,000 mm x 1,800 mm tall.

Item Ref: ND-13515-24

Details

ND-12736-24

Carle & Montanari MD332 Three Roll Refiner

Mild Steel cast iron three roll 320 mm dia x 750 mm face with hand adjustment on the rolls cored for heating or cooling

with 18.5 kw 1460 rpm belt drive.

Item Ref: ND-12736-24

Details

ND-14280-24

Chocoma Cooling Tunnel 320 mm wide x 5M long Model C=CS32

Stainless Steel Chamber 320mm wide belt x 5,500mm long Cooling Tunnel (3.5m cooled - 1m infeed - 1m outfeed)

Tunnel feed entrance = 320 mm wide x 128 mm height
designed to cool chocolate products received from moulding equipment or enrobers with a width up to 320 mm
The model is 5.5 meters long. The first meter of the cooling tunnel is an open decorating table for decoration of the products. The last meter at the rear end is an open packing table. Before entering the packing table the products are released from the main belt, which enables a gentle removal of the cooled products.
Cooling of the products is based on an air re-circulating concept, where cold air continuously is circulated from the middle of the cooling tunnel to both ends of the tunnel.
It is possible to buy tunnel extensions new from the manufacturer in 2m lengths
Year 2018
serial number 90815
temperatures down to around 3degC
Standard belt speed is variable between 0,0 – 3,0 m/min.
R134 refrigeration
Used for development / test work only
230volt, 1phase, 50hz, 2kw

Item Ref: ND-14280-24

Details

N9013-24

300L Chocolate Melter M/S Jktd

Mild Steel Jacketed Chamber 1,065mm X 530mm Deep with 2 Off 70mm dia outlets with under driven Mixer Drive. Outlets mounted to give 585mm ground clearance.

Item Ref: N9013-24

Details

ND-13783-24

20L Promag Ice Cream Machine Model CK/20 E

Key Features:

- Stainless Steel

- Manufactured by Promag

- Model CK/20 E

- 20L Working Volume

- Adjustable Temperature Control

- 380 Volts

- 4.2kw

Specification:

- Overall Dimensions; Height 1,280mm x Length 600mm x Width 500mm

- Internal Dimensions; Depth 255mm x Dia 380mm

- Shaft Length 240mm

- Scrapper Shaft Length 300mm

- Outlet Dimensions; Dia 50mm, Ground Clearance 710mm

Item Ref: ND-13783-24

Details

Confectionery