Screw Conveyor U Section
ND-13648-39
Guttridge U Trough Conveyor S/S 720Mm X 6,500mm Long
Stainless
Steel U section Conveyor 720 mm dia auger with 500 mm pitch with 390 mm
dia inlet/ outlet with 5,850 mm between centers, with 18.5 kw 81 rpm
Geared drive motor
Item Ref: ND-13648-39
ND-13649-39
Guttridge U Trough Conveyor S/S 470Mm X 4,900mm Long
Stainless
Steel U section Conveyor 470 mm dia auger with 320 mm pitch with 400 mm
dia inlet 290mm dia outlet with 3,800 mm between centers, with 5.5 kw 81 rpm
Geared drive motor
Item Ref: ND-13649-39
ND-13650-39
Guttridge U Trough Conveyor S/S 460Mm X 4,700mm Long
Stainless
Steel U section Conveyor 460 mm dia auger with 325 mm pitch with 400 mm
dia inlet 300mm dia outlet with 3,900 mm between centers, with 5.5 kw 89 rpm
Geared drive motor
Item Ref: ND-13650-39
ND-13746-39
U Trough Conveyor S/S 300Mm X 6M Long
300mm Dia X 6,000mm
Long. Trough Fabricated From 5mm S/S .
Screw Flight From 3mm Thick Material Stitch Welded To 73mm Dia Centre
Shaft. One Outlet Fitted At Drive End. Hanger Bearings Fitted.
Covers Are Bolted And Sealed Inlet 300 mm x 300 mm with 100 mm x 1,500
mm feed hopper 875 mm deep with 400 mm square outlet . Supplied on
stainless steel frame to give 2,585 mm discharge height. with 3 kw 20
-60 rpm via an inverter , Fully Guarded. Finish Outer Trough 'Dull
Polish'. built 2021 for R&D
Item Ref: ND-13746-39
N9500-39
S/S U Section Conveyor 300Mm X 2000Mm
Stainless Steel 300 mm Wide X 350mm Deep X 2000 mm Long With Bolt On Lid Top With 280mm X 455mm Inlet. With Feed Shoot 1,400 mm x 850 mm x 560 mm deep with internal grid. Bottom End 340mm X 250mm Outlet. Opposite End 75mm Dia Drain. Mounted On Mild Steel Frame To Give A 10 Degree Angle To Give 700mm Ground Clearance From Discharge.
Item Ref: N9500-39
RC674F-39
S/S U Trough Conveyor 300Mm X 4.5M Long
New U Trough S/S 316 Conveyor
300mm Dia X 4,500mm Long. Trough Fabricated in 3mm S/S Grade 316. Screw Flight from 3mm Thick Material stitch welded to 73 dia centre shaft. One Outlet Fitted at drive end. One hanger bearing fitted. Covers are bolted and sealed. Drive Motor to Ip55, 415/3/50. Final drive via Chain and Sprocket, Fully Guarded, Finish Outer Trough 'Bead Blast'. Supplied fully assembled. Starter not included.
Item Ref: RC674F-39
RC674G-39
U Trough Conveyor S/S 300Mm X 12M Long
300mm Dia X 12000mm Long. Trough Fabricated From 3mm S/S Grade 316. Screw Flight From 3mm Thick Material Stitch Welded To 73mm Dia Centre Shaft. One Outlet Fitted At Drive End. Three Hanger Bearings Fitted. Covers Are Bolted And Sealed. Drive Motor To Ip55 415/3/50. Final Drive Via Chain And Sprocket, Fully Guarded. Finish Outer Trough 'Dull Polish'. Supplied Fully Assembled. Starter Not Included.
Item Ref: RC674G-39
RC1372-39
New M/S U-section conveyor 250mm x 3000mm long
New Mild Steel U Section Conveyor 2150mm X 3000mm long with bolt on lid cover with external bearings and 1.1Kw 60 rpm Gear Drive Unit.
Item Ref: RC1372-39
11320
S/S U section conveyor 200mm x 1800mm long
Stainless Steel U section conveyor 200mm x 250mm x 1800mm long with bolt removable lid with 2 off 200mm dia outlets with butterfly valves driven by 0.75 kw 29 rpm geared motor.
Item Ref: 11320
N9111-39
S/S U-Section Conveyor 200Mmx 2300Mm
Stainless Steel 200mm X 220mm X 2300mm Long With 215mm Square Outlet. 2000L Feed Hopper 2800mm X 1000mm X 1500mm Deep Tapered To A 210mm X 1100mm Inlet Connection Bolted To Existing Conveyor. With 1.5Kw Variable Speed Gear Drive. Conveyor Auger Designed For Removal At Both Ends For Cleaning.
Item Ref: N9111-39
RC674H-39
S/S U Trough Conveyor 200Mm X 4.1M Long
Stainless Steel Conveyor U Section 200mm Dia X 4100mm Long With 60mm Dia Centre Shaft With Bolt On Lid To Allow For The 25 Deg Incline Fitted With 2 Off Square Outlets 150mm X 150mm And 1 Off Square 150mm X 150mm Inlet With Drain To Be Fitted A The Lowest Point Fitted With 2 Off Suport Pads . Driven By Sew Geared Drive To Suit.
Item Ref: RC674H-39
RC674C-39
Screw Conveyor M/S 150Mm X 3000Mm Long
New Mild Steel U Section Conveyor 150mm X 3000mm Long With Bolt On Lid Cover Withexternal Bearings And 0.75Kw Gear Drive Unit.
Item Ref: RC674C-39
RC674D-39
Screw Conveyor M/S 150Mm X 6000Mm Long
New Mild Steel U Section Conveyor 150mm X 6000mm Long With Bolt On Lid Cover With External Bearings And 1.1Kw Gear Drive Unit.
Item Ref: RC674D-39
RC674E-39
S/S U Section Conveyor 150Mm X 3000Mm
Stainless Steel Conveyor U Section 150mm Dia X 3000mm Long With 60mm Dia Centre Shaft With Bolt On Lid. Driven By 1.1 Kw Aprox 60 Rpm Gear Drive Motor
Item Ref: RC674E-39