Vertical Heated - Anchor Mixer
ND-12265-01
13,500L S/S JKTD Contra Rotational mixing vessel 5.5 kW
Stainless Steel Jacketed with contra rotational Scraped surface mixers, chamber 2,900 mm dia x 2,000 mm deep with 800 deep cone to 50 mm dia outlet. Mounted on 4 stainless steel legs to give 200 mm ground clearance. Overall height to bridge 3,300 mm. Mild steel bridge, stainless steel lid with hinge one side with inspect hatch 250 mm dia, other side fixed with various connections, centrally mounted variable speed Out scraped surface anchor stirrer 5.5 kW 3.3 to 20 Rpm inner variable speed paddle stirrer with 5.5 kW 14 to 85 Rpm. With Stainless Stainless dimple type jacket tested 90 PSI made by Kells 304 grade stainless steel.
Item Ref: ND-12265-01
N9061-01
6,300L S/S Enc Half Coil Mixing Tank
Stainless Steel with S/S Half Coil. 2,000mm Dia X 2,000mm Deep with Convex Base to 100mm Bottom Outlet. Dish Top with 500mm Manway, 2 Off 110mm dia, 75mm, 2 Off 50mm Inlets. Side with mounting pads. 20 Turns Of 55mm dia half coil. With Gate Paddle Agitator.
Item Ref: N9061-01
N10313-01
6,250L S/S Vert Jktd. Mixing Tank
Stainless Steel Water Jacketed with Stainless Steel Outer Cladding 2,000mm dia X 2,000mm Deep. Dish Top and Bottom with 50mm dia Bottom Outlet. Mounted on 3 legs to give 450mm ground clearance. Top with 500mm Manway, 75mm and 3 Off 25mm Inlets with Anchor Type Paddle Stirrer 1.5 kW 8 rpm.
Overall dia 2,200mm X Tall 3,900mm.
Item Ref: N10313-01
N10179-01
5,000L S/S Jktd Anchor Combination Mixer
Stainless Steel Water Jacketed Tank 1,600mm X 2,500mm Deep on the straight to 200mm Deep Cone to 100mm dia Bottom Center Outlet. Mounted on 4 legs to give 1,500mm ground clearance. Lid with 1/3 hinged section, 3 Off 75mm dia, 2 Off 50mm dia, 1 Off 25mm dia Inlets. Center mounted 5.5 kW V/Speed geared drive approx 20 to 70 rpm Anchor Stirrer in combination with off center Mounted 5.5 kW 1,440 rpm Tubular Vortex Stirrer. Tank made by Pierre Guernis.
Item Ref: N10179-01
ND-13584-01
4,500L S/S JKTD Contra Rotational Mix Tank
Stainless steel jacketed flp geared drive.
with centrally mounted stainless steel outer ptfe scraped surface anchor paddle and inner paddle stirrer
bottom entry shearhead stirrer [ note we can supply Rigal Bennett at extra cost]
Item Ref: ND-13584-01
ND-12266-01
4,250 L S/S JKTD Mixing Tank 4Kw
Stainless steel chamber with mild steel jacket chamber 1,900mm dia x 1,600 mm deep dish bottom to 70 mm dia outlet mounted on 4 mild steel legs to give 1000 mm ground clearance. Mild steel bridge with stainless steel lid hinged one side of the bridge fixed on the other with various connections, centre mounted gate type stirrer 4 Kw 16 Rpm. Mild steel jacket tested 75 PSI.
Item Ref: ND-12266-01
ND-14267-01
2,500L Stainless Steel Electrically Heated & Jacketed Mixing Tank
Product Description:
This new & unused 2,500L stainless steel tank is designed and manufactured by Rigal Bennett Group. Constructed from 316 grade stainless steel, the tank features a 1,520mm internal diameter and 1,560mm depth, with a dish bottom leading to a 2" RJT outlet. Equipped with an atmospheric Eco Oil Jacket. With Rockwool insulation and a stainless steel outer cladding. Heated by six 12kw immersion heater elements to ensure a maximum temperature of 120°C, with higher temperatures available on request.
Technical Specifications:
- Capacity: 2,500 liters
- Material: Stainless Steel 316
- Manufacturer: Rigal Bennett Group
- New Vessel Stock Ref: OJ56S-63
- Dimensions:
- Vessel Diameter: 1,520mm
- Vessel Depth: 1,560mm
- Outlet: 2" RJT
- Brim Height: 2,500mm
- Mounting: Stainless steel base frame, with 400mm ground clearance
- Jacket Type: Atmospheric Eco Oil Jacket
- Insulation: Rockwool, with stainless steel outer cladding
- Heating: 6 x 12 kw immersion heaters, for up to 120°C
Agitation System:
Anchor Scrape Agitator (Center Mounted - Stock Ref; GP550A-63):
- Drive: 5.5kw TEFC geared drive at 30rpm
- Features: PTFE hinged scrapers for optimized mixing and tank scraping
Top Entry Shearhead Mixer (Off-Center Mounted - Stock Ref; E1503-63):
- Drive: 15kw, 3-phase, 1,440rpm for high shear mixing
- Shearhead Size: 150mm diameter
- Mounting: Flanged attachment to bridge with lift-out hook for servicing
Top Entry Incorporator Mixer (Opposite Side Off-Center Mounted - Stock Ref; GP550-63):
- Drive: 5.5kw, variable speed 3-phase (190–500 rpm)
- Impellers: Two stainless steel marine impellers
- Mounting: Flanged with lift-out hook for easy servicing
Control System:
- Control Panel: Tank-mounted control panel with start/stop controls, indicator lights for each drive, emergency stop, and lid safety interlocks.
- Frequency Inverter: Each mixer includes a frequency inverter speed control with a digital display and timer control for precise operation.
Current Condition: New & Unused
Item Ref: ND-14267-01
N8360-01
675L S/S Jktd Scraped Surface Mixer
Stainless Steel Hemispherical Mixer with S/S Jacket 1,000 mm Dia 1,000 mm Deep to 75 mm outlet. Mounted on legs to give 910 mm clearance.1.5 kW 11-68 rpm V/Speed Agitator bridge mounted with R-B Shearhead Mixer 7.5 kW.
Made by Giusti Jk T.P.80 W.P.40 Psi. Overall height 2,550 mm.
Item Ref: N8360-01
N9583-01
560L S/S Jktd Scraped Anchor Mixer
Stainless Steel Jktd with Rockwool Insulation and S/S Cladding 1,100 mm Dia X 670 mm deep. Dish Bottom with 50 mm dia outlet. Stainless steel lid and bridge with hinged lid. S/S Anchor with Ptfe scrapers to suit. 4 kW 26 rpm drive.
W. P. approx 3 Bar. Overall height 1,850 mm
Item Ref: N9583-01
ND-11598-01
500L S/S JKTD Hemispherical Scrap Surface Tilting Pan 1.5 kW
Stainless Steel Jacketed Pan 1,060mm dia x 800mm deep with a 1.5 kW approx 5 to 30 RPM v speed Anchor stirrer with PTFE hinged scrapers. Mounted on a Stainless Steel frame with Hand Hydraulic lift to elevate the Stirrer and geared Hand operated tilt to tilt the pan for discharge. Overall size 1,800mm x 2,000mm x 1,800mm tall closed height. [Jacket failed pressure test]
ASIS price is for the unit without a working jacket. At extra cost this pan could be re-jacketed to suit new application.
Item Ref: ND-11598-01
ND-11769-01
460L S/S JKTD Hemispherical Scraped Surface Mixer
Stainless Steel Hemispherical Chamber with mild steel outer jacket previous use at WP 60 PSI TP 90 PSI. 1020 mm dia x 810mm deep with 75mm dia outlet. Mounted on four legs to give 600mm ground clearance. With stainless steel lid and bridge to suit stirrer.
Item Ref: ND-11769-01
N9271-01
420L S/S Jktd Anchor Mixer 2.2 kW
Stainless Steel with Mild Steel Jacket 750 mm Dia X 950 mm Deep. Dish Bottom To 25 mm Dia Outlet. Mounted On 4 Off Legs to give 100 mm Clearance. Fitted with 2.2 kW 30 Rpm Anchor Stirrer. W.P. 45 Psi. T.P. 68 Psi. Made by SSV.
Item Ref: N9271-01
ND-13508-01
355L SS Fairfield Dalton Hemispherical JKTD Mixing Tank 1.1 kw
Key Features:
- Stainless Steel Jacketed Pan
- 355L Capacity
- Manufactured by Fairfield Dalton
- Anchor Paddle Stirrer Blade
- RJT Outlet
- Test Pressure 4.77 Bar
- Working Pressure 2.58 Bar
Specification:
- Overall Dimensions; 860mm Dia x 790mm Deep
- Total Height 1300mm
- RJT Outlet; Diameter 50mm
- Ground Clearance; 450mm, mounted on 3 legs
- 1/3 Hinge Lid with Stainless Steel Bridge
- Motor; About 1.1 kw, 30 rpm (Replacement Required)
Item Ref: ND-13508-01
S8867-01
350L S/S Jktd Tilting Mixer
1,000 mm dia X 780mm Deep with 1.1 kW Gear Drive. Gate Agitator Unit on A Frames with Hand Worm Tilting.
Item Ref: S8867-01
S8813-01
325 L S/S Jktd Scraped Tilting Mixer
Stainless Steel Tilting Mixer 830mm Dia 600mm On Straight with Dished Bottom. Mild Steel Pressure Jacket. 75 kW 12 Rpm Geared Drive.
Item Ref: S8813-01
N9115-01
260L S/S Jktd Scraped Anchor Mixer 1.1 kW
Stainless Steel Water Jacketed Zero Pressure. 620mm Dia X 860mm Deep. Dish Bottom to 50mm Iss Outlet. Mounted on 4 Legs to give 150mm Ground Clearance. With Scraped Anchor Stirrer 1.1 kW 70 Rpm with Croft Box size F13. Overall size 1,200mm X 1,200mm X 2,400mm Tall.
Item Ref: N9115-01
N9128-01
250L S/S Tourell C/Rotating Scrape Mixer
Stainless Steel with Mild Steel Jacket 800mm Dia X 640mm Deep. Hemispherical Pan to 50mm Dia Bottom Outlet with S/S Lid Hinged at One-Third with 4 kW Drive. Overall size 1,500mm X 2,000mm X 1,900mm Tall.
Item Ref: N9128-01
ND-13506-01
250L SS BCH Hemispherical JKTD Mixing Tank 2.2 kw
Key Features:
- Stainless Steel
- 250L Capacity
- Manufacturer BCH
- Anchor Paddle Stirrer Blades
- Mounted on 4 Legs
Specification:
- Overall Dimensions; Brim Height 1,430mm, x Dia 760mm x 790mm Deep
- Outlet Dimensions; 75mm Dia with 500mm Ground Clearance
- 1/3rd Hinge Lid with Stainless Steel Bridge
- Motor Approx 2.2kw
- Gear Drive Approx 30rpm
- Test Pressure 80Psi, Working Pressure 49.5Psi
Item Ref: ND-13506-01
S10029-01
225L Giusti S/S Scraped Mixer
Stainless Steel Scraped Tilting Mixer 800mm Dia X 920mm Full Depth with Hemispherical Bottom to 75mm Dia Outlet with Horizontally Mounted Scraped Agitator 1.5 kW 30 rpm.
Mounted on S/S Frame 1,400mm X 1,600mm X 1,440mm Tall Closed 1,900mm Open Height with Hand Hydraulic Tilt for Cleaning.
Made by Giusti Test Pressure 8.25 Bar Working Pressure 5.5 Bar.
Item Ref: S10029-01
ND-13238-01
225L S/S Hemis Anchor Scraped Mixing Tank 0.55Kw
Stainless Steel Jacketed Hemispherical Mixing Pan 800mm Dia X 740mm
Deep To 50mm Bottom Elbowed Outlet On 4 Legs To Give 250mm Ground Clearance. Brim Height 1,000 mm With
Stainless Steel Anchor Paddle, with PTFE Hinged Scraper bladed Stirrer Blade Driven By 0.55Kw 27 Rpm
Stirrer Drive. Unit Made By Gardham End . Jacket Test
Pressure 80 P.S.I. made 1986. Overall Size 1,000 mm x 1,000 mm x 1,350 mm tall
Item Ref: ND-13238-01
N9964-01
25L Giusti S/S Electrical Scraped Mixer
Stainless Steel Electrically Heated Jacket 290mm Dia X 450mm Deep To 48mm Dia Outlet With Electrically Heated Jacket, Bottom Entry Anchor Scrape Paddle, S/S Hinged Lid Mounted On S/S Frame 760mm X 500mm X 840mm Tall. With Hand Tilt To Clean. Manuf 1985. Machine No. 9868.
Item Ref: N9964-01