Screw Conveyor U Section

ND-13648-39
Guttridge U Trough Conveyor S/S 720Mm X 6,500mm Long
Stainless Steel U section Conveyor 720 mm dia auger with 500 mm pitch with 390 mm dia inlet/ outlet with 5,850 mm between centers, with 18.5 kw 81 rpm Geared drive motor


Item Ref: ND-13648-39
Details
ND-13649-39
Guttridge U Trough Conveyor S/S 470Mm X 4,900mm Long
Stainless Steel U section Conveyor 470 mm dia auger with 320 mm pitch with 400 mm dia inlet 290mm  dia outlet with 3,800 mm between centers, with 5.5 kw 81 rpm Geared drive motor


Item Ref: ND-13649-39
Details
ND-13650-39
Guttridge U Trough Conveyor S/S 460Mm X 4,700mm Long
Stainless Steel U section Conveyor 460 mm dia auger with 325 mm pitch with 400 mm dia inlet 300mm  dia outlet with 3,900 mm between centers, with 5.5 kw 89 rpm Geared drive motor


Item Ref: ND-13650-39
Details
ND-14009-39
Stainless Steel U section Conveyor 400 mm dia 450 x 7m long
Stainless Steel U section conveyor 400 mm wide x 450mm deep x 7,000mm long with bolt removable lid 600 mm 450 mm inlet and 270 mm dia outlet with 11kw 69 rpm geared drive motor. overall size  630 mm x 8,050mm x 775 mm deep. weight about 1,300 kg. Made by Wright Dowson.
Item Ref: ND-14009-39
Details
ND-13959-39
M/S U Section Conveyor 380 mm x 400 mm x 4m long
Mild Steel U section conveyor 380 mm wide x 400 mm deep x 4,000mm long, with 370 mm x 370 mm outlet.
Mild steel galvanized feed hopper  1,000mm x 3,000mm x 1,500 deep one end and 500 mm the other. with 1.5 kw 140 rpm gear drive motor.

Item Ref: ND-13959-39
Details
ND-13746-39
U Trough Conveyor S/S 300Mm X 6M Long
300mm Dia X 6,000mm Long. Trough Fabricated From 5mm S/S . Screw Flight From 3mm Thick Material Stitch Welded To 73mm Dia Centre Shaft. One Outlet Fitted At Drive End. Hanger Bearings Fitted.   Covers Are Bolted And Sealed Inlet 300 mm x 300 mm with 100 mm x 1,500 mm feed hopper 875 mm deep with 400 mm square outlet . Supplied on stainless steel frame to give 2,585 mm discharge height. with 3 kw 20 -60 rpm via an inverter , Fully Guarded. Finish Outer Trough 'Dull Polish'. built 2021 for R&D
Item Ref: ND-13746-39
Details
N9500-39
S/S U Section Conveyor 300Mm X 2000Mm
Stainless Steel 300 mm Wide X 350mm Deep X 2000 mm Long With Bolt On Lid Top With 280mm X 455mm Inlet. With Feed Shoot 1,400 mm x 850 mm x 560 mm deep with internal grid. Bottom End 340mm X 250mm Outlet. Opposite End 75mm Dia Drain. Mounted On Mild Steel Frame To Give A 10 Degree Angle To Give 700mm Ground Clearance From Discharge.
Item Ref: N9500-39
Details
RC674F-39
S/S U Trough Conveyor 300Mm X 4.5M Long
New U Trough S/S 316 Conveyor 300mm Dia X 4,500mm Long. Trough Fabricated in 3mm S/S Grade 316. Screw Flight from 3mm Thick Material stitch welded to 73 dia centre shaft. One Outlet Fitted at drive end. One hanger bearing fitted. Covers are bolted and sealed. Drive Motor to Ip55, 415/3/50. Final drive via Chain and Sprocket, Fully Guarded, Finish Outer Trough 'Bead Blast'. Supplied fully assembled. Starter not included.
Item Ref: RC674F-39
Details
RC674G-39
U Trough Conveyor S/S 300Mm X 12M Long
300mm Dia X 12000mm Long. Trough Fabricated From 3mm S/S Grade 316. Screw Flight From 3mm Thick Material Stitch Welded To 73mm Dia Centre Shaft. One Outlet Fitted At Drive End. Three Hanger Bearings Fitted. Covers Are Bolted And Sealed. Drive Motor To Ip55 415/3/50. Final Drive Via Chain And Sprocket, Fully Guarded. Finish Outer Trough 'Dull Polish'. Supplied Fully Assembled. Starter Not Included.
Item Ref: RC674G-39
Details
RC1372-39
New M/S U-section conveyor 250mm x 3000mm long

New Mild Steel U Section Conveyor 2150mm X 3000mm long with bolt on lid cover with external bearings and 1.1Kw 60 rpm Gear Drive Unit.

Item Ref: RC1372-39
Details
11320
S/S U section conveyor 200mm x 1800mm long

Stainless Steel U section conveyor 200mm x 250mm x 1800mm long with bolt removable lid with 2 off 200mm dia outlets with butterfly valves driven by 0.75 kw 29 rpm geared motor.

Item Ref: 11320
Details
N7023-39
Screw Conveyor M/S 4 Off U-Trough
Mild Steel U Trough With 4 Off Continous Ribbon Auger Conveyor 200mm Dia X 2740mm Long With 250mm Square Outlets Driven By 5.5 Kw 30 Rpm Drive.
Item Ref: N7023-39
Details
N9111-39
S/S U-Section Conveyor 200Mmx 2300Mm
Stainless Steel 200mm X 220mm X 2300mm Long With 215mm Square Outlet. 2000L Feed Hopper 2800mm X 1000mm X 1500mm Deep Tapered To A 210mm X 1100mm Inlet Connection Bolted To Existing Conveyor. With 1.5Kw Variable Speed Gear Drive. Conveyor Auger Designed For Removal At Both Ends For Cleaning.
Item Ref: N9111-39
Details
RC674H-39
S/S U Trough Conveyor 200Mm X 4.1M Long
Stainless Steel Conveyor U Section 200mm Dia X 4100mm Long With 60mm Dia Centre Shaft With Bolt On Lid To Allow For The 25 Deg Incline Fitted With 2 Off Square Outlets 150mm X 150mm And 1 Off Square 150mm X 150mm Inlet With Drain To Be Fitted A The Lowest Point Fitted With 2 Off Suport Pads . Driven By Sew Geared Drive To Suit.
Item Ref: RC674H-39
Details
N4357-39
Screw Conveyor M/S 200 Mm Dia 910Mm Long
Mild Steel U Section Conveyor No Drive
Item Ref: N4357-39
Details
N10194-39
Screw Conveyor M/S U-Section 170 X 2100
Mild Steel U-Section Conveyor 170mm X 170mm X 2100mm Long. Bare Shafted.
Item Ref: N10194-39
Details
RC674C-39
Screw Conveyor M/S 150Mm X 3000Mm Long
New Mild Steel U Section Conveyor 150mm X 3000mm Long With Bolt On Lid Cover Withexternal Bearings And 0.75Kw Gear Drive Unit.
Item Ref: RC674C-39
Details
RC674D-39
Screw Conveyor M/S 150Mm X 6000Mm Long
New Mild Steel U Section Conveyor 150mm X 6000mm Long With Bolt On Lid Cover With External Bearings And 1.1Kw Gear Drive Unit.
Item Ref: RC674D-39
Details
RC674E-39
S/S U Section Conveyor 150Mm X 3000Mm
Stainless Steel Conveyor U Section 150mm Dia X 3000mm Long With 60mm Dia Centre Shaft With Bolt On Lid. Driven By 1.1 Kw Aprox 60 Rpm Gear Drive Motor
Item Ref: RC674E-39
Details