Confectionery

ND-13515-24
Hecomatic S/S Coater -Deduster Plastic Belt 370 mm x 1,600 mm long
With Plastic belt 370 mm wide x 1,600 mm long mounted 1,250 mm high over a stainless steel trough spray 19 mm dia spray manifold above and below the conveyor belt with Staimless Steel hood with  200 mm dia in/outlet connections overall size 700 mm x 2,000 mm x 1,800 mm tall.
Item Ref: ND-13515-24
Details
ND-14280-24
Chocoma Cooling Tunnel 320 mm wide x 5M long Model C=CS32
Stainless Steel Chamber 320mm wide belt x 5,500mm long Cooling Tunnel (3.5m cooled - 1m infeed - 1m outfeed)

Tunnel feed entrance = 320 mm wide x 128 mm height
designed to cool chocolate products received from moulding equipment or enrobers with a width up to 320 mm
The model is 5.5 meters long. The first meter of the cooling tunnel is an open decorating table for decoration of the products. The last meter at the rear end is an open packing table. Before entering the packing table the products are released from the main belt, which enables a gentle removal of the cooled products.
Cooling of the products is based on an air re-circulating concept, where cold air continuously is circulated from the middle of the cooling tunnel to both ends of the tunnel.
It is possible to buy tunnel extensions new from the manufacturer in 2m lengths
Year 2018
serial number 90815
temperatures down to around 3degC
Standard belt speed is variable between 0,0 – 3,0 m/min.
R134 refrigeration
Used for development / test work only
230volt, 1phase, 50hz, 2kw

Item Ref: ND-14280-24
Details