2,000 L S/S Enc Intensive Liquiverter

New Stainless Steel Vertical Rectangular Vessel 1,250 mm X 1,250 mm X 1,550 mm on Straight with 400 mm Coned Bottom to 400 mm Dia Tangential Outlet to 70mm Dia  connection.   Mounted on Stainless Steel Frame to give Ground Clearance to allow removal of Stirrer & Rotor Frame from Tank if required [Without strip down from inside tank].  Radiused Top with Centre 460 mm Dia Manhole with Internal Safety Grid, Top with 6 Off Inlets to 50 mm Dia Connections and Breather to suit. Made from 304 Grade Stainless Steel. With Bottom Entry Four Cup Bladed 300 mm Swept Dia X 120 mm Deep Rotor Dispersion Blade.  Driven by 30 kW 1,440 Rpm Belt Driven Motor Mounted to one side of  mixer tank. With Bell Housing to Suit Bearings and Mechanical Seal Assembly fitted with Vertical Shaft to suit Rotor Location. [Control Panel Supplied At Extra Cost.]