Plough Shear
ND-13314-10
10,000L S/S Lodige Ploughshear mixer type FKM-15000D 12 ZF 110 Kw
Stainless Steel Ploughshear mixer chamber about 2,200 mm dia x 6,300 mm long
top with 110 Kw geared
drive motor for the main plough arm, 1440 / 63 Rpm overall size 6500mm x 2300 mm x 2500 mm tall weight 11,000 kg.
Item Ref: ND-13314-10
ND-12366-10
2,700 L S/S Imcatec Horizontal Tee Arm Mixer 7.5 kW
Stainless Steel Chamber 1,600 mm Dia x 2,000 mm long with 200 mm dia in/outlets two of side access doors for cleaning. Made by IMCATEC. Model CIM-L4000 No.: 21689
Item Ref: ND-12366-10
ND-12387-10
2,650 L S/S JKTD Littleford Plough Shear Mixer 120 Kw Model: VT-4200-D
Stainless Steel Chamber 1,220 mm Dia x 3,400 mm long internally rated full vacuum. Jacket rated 90 PSI with 10 off 180 mm wide plough arms to off end scrapers with 120 Kw Hydraulic drive. Top with 2 off 910 mm dia inlets bottom with 310 mm x 250 mm outlet with 2 off side hinged access doors 760 mm x 380 mm. Model: VT-4200-D
Serial number: 42167-4642
Item Ref: ND-12387-10
ND-12388-10
2,650 L S/S JKTD Littleford Plough Shear Mixer 120 kW Model: VT-4200-D
Stainless Steel Chamber 1,220 mm Dia x 3,400 mm long internally rated full vacuum. Jacket rated 90 PSI with 10 off 180 mm wide plough arms to off end scapers with 110 kW Hydraulic drive. Top with 2 off 910 mm dia inlets bottom with 310 mm x 250 mm outlet with 2 off side hinged access doors 760 mm x 380 mm. Model: VT-4200-D
Serial number: 41988-4470
Item Ref: ND-12388-10
ND-14059-10
2,100L M/S Wam Continuous Plough Shear Mixer Type WAHVC 3000 LI
- Chamber Material: Mild steel
- Chamber Dimensions: 1,100 mm x 3,000 mm long
- Plough Arms: Customized to fit the chamber, with hardox tipped blades for durability
- Drive System: Equipped with a 75 kW gear drive
- Inlet/Outlet: Sized at 700mm x 350mm
- Inspection Hatches: 2 off side inspection hatches measuring 600 mm x 550mm
- Frame: Mounted on a mild steel frame for stability, providing about 1200 mm of ground clearance
- Overall Dimensions: 5,748 mm x 2,400 mm x 3,000 mm (height)
- Weight: Approximately 7,500 kg
- Control Panel: Mounted in an enclosure below the machine
- Manufacturer: WAM, Machine number W17161
This machine seems well-designed for continuous mixing processes and appears to be sturdy and sizable. It's likely capable of handling substantial volumes and demanding industrial applications.
Item Ref: ND-14059-10
ND-13269-10
2,000L Wam S/S Tee Blade Type Mixer 55kw
Stainless
Steel Horizontal Chamber 1,100 mm dia x 3,000 mm long with Tee arm
Paddle blades with 55 kw 104 rpm drive 4 off 5.5 kw 2880 rpm Tulip Shape high speed
choppers. Top with 3 off top inlets aprox 300 mm dia and bottom center outlet
300mm dia side inspection hatches 610 mm x 550 mm . Model Number WBH302CL4GG471
Item Ref: ND-13269-10
ND-13927-10
1,660 L S/S JKTD Kek Gardner Plough shear mixer Type 2500E
Stainless steel Jacketed Horizontal Ploughshear Mixer
Stainless Steel Jacketed rated WP 40 PSI Test 70 PSI chamber 1,350 mm dia x 2,000 mm with 75 kw geared drive 2 off 5.5kw 2880 Rpm refiner - cutter blades [ port for a third]
Mounted on mild steel frame legs to give 500 mm ground clearance. over all size 3,500 mm x 2,000 mm x 3,200 mm tall base frame about 1,500 mm tall.
Item Ref: ND-13927-10
ND-12913-10
1300L S/S Lodige Plough Shear Mixer Type FKM-2000-D 55kw
Stainless Steel Plough shear mixer chamber about 1,120 mm dia x 1,980 mm long with 2 off 250 mm dia inlets and bottom 250 mm dia centre outlet with 55 kw 120 rpm geared drive fitted with 3 off side mounted 7.5 kw cutters or choppers
Item Ref: ND-12913-10
ND-13743-10
1300L S/S Lodige Plough Shear Mixer Type FKM-2000-DSZ 55kw
Key Features:
- Stainless Steel
- Manufactured by Lodige
- 1,300L Capacity
- 8 Plough Shear Blades
- 3 Side Mounted Cutters
- 2 Top Inlets with 1 Bottom Outlet
Specification:
- Volume 1,300L
- Overall Dimensions; Height 1,720mm x Length 4,200mm x Width 1,900mm x
- Internal Dimensions; Diameter 1,100mm x Length 2,000mm
- Top Outlet Dimensions; OD 415mm, ID 350mm, Distance Between Centres 950mm
- Bottom Outlet Dimensions; OD 415mm, ID 350mm, Ground Clearance 355mm
- Inspection Doors x2; Height 400mm x Length 520mm
- Plough Shear Shaft Running Through Center with 55kw Motor and 120rpm Gear Drive
- 3 Off Side Mounted 7.5kw Motors Attached to Side Cutters
[ Control panel can be supplied at extra cost]
Item Ref: ND-13743-10
ND-14068-10
1,000L S/S JKTD Lodige Plough Shear Mixer
Stainless Steel chamber with mild steel outer jacket about 950 mm dia x 1,700mm long
with 22 kw geared drive Item Ref: ND-14068-10
ND-14080-10
200L Winkworth S/S High Speed Tee Arm Paddle Shear Mixer Type RT200 5.5 Kw
Stainless Steel High Speed Tee Arm Paddle Shear Mixer 5.5 kW variable
speed 21 to 100 rpm Chamber 645mm dia x 1,000mm Packed Gland seals Top
with 120mm dia inlet, side with inspection port 450mm x
310mm with side port to suit 4 kw 2880 rpm cutter bottom outlet 120mm x 100 mm mounted on a mild steel frame to
give 500mm ground clearance. Overall size 2,200mm x 1,400mm x 1,600mm
tall.
Specification | Details |
---|---|
Model | Winkworth RT200 |
Capacity | 200 liters |
Chamber Dimensions | 645mm diameter x 1,000mm height |
Motor | 5.5 kW |
Variable Speed | 21 to 100 rpm |
Seals | Packed gland seals |
Top Inlet | 120mm diameter |
Side Inspection Port | 450mm x 310mm |
Side Port for Cutter | 4 kW, 2880 rpm |
Bottom Outlet | 120mm x 100mm |
Frame Material | Mild steel |
Ground Clearance | 500mm |
Overall Dimensions | 2,200mm x 1,400mm x 1,600mm tall |
Item Ref: ND-14080-10
ND-13605-10
180L S/S Winkworth High Speed Tee Arm Paddle Mixer Type HMC 200
Stainless
Steel chamber 565 mm dia x 1150 mm long with 200 mm dia inlet &
outlet with 1,230 mm ground clearance, inspection hatch 350 mm x 610 mm 4
kw 2800 rpm side cutter main tee arm drive 5.5 kw 78 rpm gear drive
with 5.5 kw mounted on mild steel frame with 950 mm long legs overall
size 1,900 mm long x 1,300 mm x 2,000 mm tall Made by Winkworth serial
number. 19089
Item Ref: ND-13605-10
ND-14076-10
90L S/S JKTD Lodige Ploughshare mixer. Type FM 130
Stainless
Steel chamber with Mild Steel Jacketed Chamber about 500 mm dia x 650
mm on the straight with 5.5 kW geared drive motor 3 phase 50
hz 400 volts. with port to suit cutter. with control panel. overall
size about 1,300 mm x 1,200 mm x 1,600 mm tall.
Item Ref: ND-14076-10
ND-14060-10
15L Morton S/S Ploughshear Mixer Model M20E
15L Morton S/S Ploughshear Mixer Model M20E
Stainless Steel Plough shear mixer 300 mm dia x 300 mm long with 4 kw Gear drive
made by morton number 2M 89/Y
Item Ref: ND-14060-10
ND-14087-10
5L S/S Winkworth Plough shear mixer
WebID | Status | Reference Number | Action |
---|---|---|---|
Stainless Steel Chamber aprox 170mm dia x 190mm long with In/Outlet 80mm x 140mm with 0.37 Kw geared drive mounted on a table to give overall size 900mm x 650mm x 1450mm tall |
Item Ref: ND-14087-10