Side & Bottom entry Stirrer

GT75SEF-63
R-Bennett Side Mounted Stirrer 7.5 kW Flp
Standard 3 Phase Flp Geared Motor up to 440 Rpm with stainless steel shaft to suit tank and marine paddle.  Flange Mounted with mechanical seal or Packed Gland.  Mounted in Bell Housing.
Item Ref: GT75SEF-63
Details
GT75SE-63
Rigal-Bennett Side Entry Stirrer 7.5 kW
Geared Drive 280 Rpm. Unit Mounted In Bell Housing with flange to suit existing vessel fitted with mechanical seal to suit length of stainless steel shaft to suit tank Approx 550 mm. Fitted with 500 mm Dia Stainless Steel Marine Propeller.
Item Ref: GT75SE-63
Details
TC05VPSR-63
Rigal Bennett Cutter 5.5 kW
New Cutter Mixer with 2,800 Rpm Drive.  Fitted with 4 Off 2 Bladed Cutters from 150 mm to 50 mm Swept Dia.  Flange Mounted in Mild Steel Bell housing with Pack Gland Seal or Mechanical Seal to suit application.
Item Ref: TC05VPSR-63
Details
GT55SEF-63
Rigal-Bennett Side Entry Marine Stirrer
5.5 kW Geared Drive up to 280 Rpm Flp Eexd Zone 2 Ip55 T3 Rated Motor. Unit Mounted In Bell Housing with Flange to suit existing vessel fitted with mechanical seal to suit length of stainless steel shaft to suit tank Approx 550 mm. Fitted with 500 mm Dia Stainless Steel Marine Propeller.
Item Ref: GT55SEF-63
Details
GT55SE-63
Rigal-Bennett Side Entry Marine Stirrer
5.5 kW Geared Drive up to 280 Rpm Tefc Rated Motor. Unit Mounted In Bell Housing with Flange to suit existing vessel fitted with mechanical seal to suit temp up to  60 Deg. C  Length of stainless steel shaft to suit tank Approx 550 mm. Fitted with 500 mm Dia Stainless Steel Marine Propeller.
Item Ref: GT55SE-63
Details
GT22SEF-63
Rigal-Bennett Side Entry Stirrer Flp
2.2 kW Geared Drive 330 Rpm Flp Motor. Unit Mounted In Bell Housing with Flange to suit existing vessel fitted with Mechanical Seal to suit length of Stainless Steel Shaft to Suit Tank Approx 450 mm.  Fitted with 250 mm Dia Stainless Steel Marine Propeller.
Item Ref: GT22SEF-63
Details
GT22SE-63
Rigal-Bennett Side Entry Stirrer 2.2 kW
2.2 kW Geared Drive up to 330 Rpm Tefc Rated Motor.  Unit Mounted In Bell Using with flange to suit existing vessel fitted with Mechanical Seal to suit.  Length of stainless steel shaft to suit tank Approx 450 mm.  Fitted with 250 mm Dia Stainless Steel Marine Propeller.
Item Ref: GT22SE-63
Details