Laboratory/Pilot mixer

LP-13185-63
M/S Mesh Safety Cage 910 mm x 910mm x 1,800 mm Tall
Mild Steel Mesh Safety Cage 910 mm x 910mm x 1,800 mm Tall with twin hinge gate doors for access
Item Ref: LP-13185-63
Details
EV11T-15-63
Rigal Bennett S/S Trifoil Blade 200Mm
Stainless Steel Bush Mounted Trfoil Blade 200mm Swept Dia
Item Ref: EV11T-15-63
Details
EV11T-12-63
Intermediate Impeller S/S
83mm Dia
Item Ref: EV11T-12-63
Details
EV11T-1-63
1.5/0.75Kw 2880/1440 Rpm 2 Speed Flange
Frame W-Da90sg-D 3 Phase Motor
Item Ref: EV11T-1-63
Details
LP-13491-63
Motorised hydraulic power pack to suit pilot stirrer
single phase or three phase
Item Ref: LP-13491-63
Details
EV11T-14-63
S/S Slotted Stator Head
Item Ref: EV11T-14-63
Details
EV11T-2-63
S/S Muff Coupling
Item Ref: EV11T-2-63
Details
EV11T-3-63
S/S Type 56 Cartridge Mechanical Seal
Flushing
Item Ref: EV11T-3-63
Details
EV113-4-63
S/S Rotor Shaft
Item Ref: EV113-4-63
Details
EV11T-5-63
Ptfe Rotor Bearing
Item Ref: EV11T-5-63
Details
EV11T-6-63
S/S Rotor Blade
Item Ref: EV11T-6-63
Details
EV11T-7-63
S/S General Purpose Stator Head
Item Ref: EV11T-7-63
Details
EV11T-8-63
S/S Stator Support Shaft
Stainless Steel
Item Ref: EV11T-8-63
Details
EV11T-9-63
S/S Mounting Flange
Item Ref: EV11T-9-63
Details
EV11T-10-63
Support Bell Housing
Item Ref: EV11T-10-63
Details
EV11T-7A-63
S/S Highshear Stator Head
Stainless Steel
Item Ref: EV11T-7A-63
Details
LS37SCL-50
Stainless Steel Lab/Pilot Bowl Clamps
Stainless Steel Bowl Clamps To Suit Stand Base
Item Ref: LS37SCL-50
Details
LS37S-50
Stainless Steel Stand For Lab Stirrers
S/S Base 600mm X 600mm with 80 M/M Dia Vertical Stand Shaft Standard Length 1,400 M/M Tall. With Clamping Bar and Stirrer Mount.
Item Ref: LS37S-50
Details
EV-111-63
Perspex Safety Lid up to 600 Diameter
Perspex Safety Lid up to 600 Diameter with S/s Tri clover mount to suit stirrer

Item Ref: EV-111-63
Details
EV11ST-11-63
Lab s/s Hydraulic Raise Lower Stand
Unit suitable for .37 - 2.2 kW motors. Standard Unit Raise lower column 1,200 mm tall  With hand hydraulic raise lower ram standard stroke 400 mm. Overall Dimensions 600 X 600 X 1400 mm Tall. [Bowl Clamps can be fitted At Extra cost, as can longer hydraulic ram stroke lengths up to 1,000 mm  at extra cost ]





Item Ref: EV11ST-11-63
Details