Extruder

N9201-09
500L Iozzelli Twin Paddle Mixer-Grinder Extruder
Stainless Steel Interrupted Paddles Trough Size 800 mm X 1,800 mm X 570 mm Deep to 150 mm Dia x 550 mm long Extruder to Die plate. Each Paddle with 2.2 kW Drive.  Extruder with approx. 22 kW Drive.  Overall size 2,500 X 1,200 X 1,800 mm .
Item Ref: N9201-09
Details
ND-12785-09
Baker Perkins Continuous Jacketed Screw Mixer
Stainless Steel mild steel jacketed mixer extruder 200 mm dia x about 1,500 mm long feed screw  to 330 mm dia  about 2,200mm long second stage mixer - extruder with 18.5 kw 5 to 142 rpm overall size 812 mm x 5600 mm x 1,700 mm tall  
Item Ref: ND-12785-09
Details
N8742-09
Oakes Continuous Mixer Model 8D/45/6
Stainless Steel 200mm Dia X 1740mm Long With Interrupted Flights And Static Teeth Plates. Jacketed For 730mm With 200mm Dia Inlet And 200mm X 300mm Outlet. Overall Size 1100mm X 3600mm X 2000mm Tall With 13/41Kw 1440/480 Rpm Ac Comutator Variable Speed Gear Drive. Made By E.T. Oakes Corp
Item Ref: N8742-09
Details
N9301-24
Twin Screw Baker Perkins Mixer/Extruder
Stainless Steel Jacketed. Main Rotor Mixer 170mm Dia X 1800mm Long . Chamber Dims 340mm Wide X 180mm Tall X 1800mm Long. 5.5Kw 74 Rpm Gear Drive To Twin Screw Cross Feed Extruder Head Mounted At 90 Degrees With 70mm Dia X 850mm Long Rotors. Chamber 140mm Wide X 70mm Deep X 850mm Long With 0.75Kw 103 Rpm Drive. Unit With 180mm X 200mm Inlet And 100mm Dia Outlet. Jacket W.P. 35 Psi. T.P. 50 Psi. Overall Size 3200mm X 1300mm X 1150mm Tall.
Item Ref: N9301-24
Details
N9517-09
Nuova Euromec Twin Screw Extruder 70/Fs
Stainless Steel body with Nylon Twin Screws 160mm dia X 1,000mm Long.  Fed by 2 Off 110mm dia X 400mm Face Cutter Rotors to Feed Main Extruder.  Driven by 35 kW drive. Water Cooled Jacket with 150mm X 100mm Cutter.                        Unit  currently fitted with a 90mm X 45mm dischargeplate.
Overall size 2,400mm X 1,400mm X 1,750mm Tall.
Item Ref: N9517-09
Details
N6832-09
Extrud-O-Mix M/S Jktd 150 Dia X 460Mm
Mild Steel Single Screw Mixer Extruder 150 mm Dia X 460mm Long Screw, 75 X 100 mm Feed Port With 7.5Kw Drive Motor.
Item Ref: N6832-09
Details
N8359-09
William Boulton Screw Extruder Junior Da
Mild Steel Single Screw 125mm Dia.Mixer Feed 125mm.X 175mm. 125mm.X 175mm. Extruder Feed 75mm.Extruder Head With 1.5 Kw Variable Speed Gear Drive
Item Ref: N8359-09
Details
ND-13507-09
BCH JKTD Horizontal Auger Screw Extruder 120 mm dia x 2000 mm long
Stainless Steel Jacketed Horizontal Auger Single Screw Extruder 120 mm dia x 2,000 mm long with side extrusion plate 610 mm x 60 mm. Inlet 300 mm x 300 mm   with aprox 15 kw variable speed drive 10 to 140 rpm mounted on trolley base. Overall size 2,400 mm x 1,800 mm x 1,800 mm tall


Item Ref: ND-13507-09
Details
ND-13647-09
Samfull S/S extruder with horizontal form fill and sealer
Stainless Steel extruder 120 mm dia x 660 mm long with 2 off horizontal feed rolls about 65 mm dia x 660 mm long with extruder die head to feed horizontal form fill and sealer set up to fill 90 to 110 mm wide x 150 mm to 200mm long sachets overall size of machine 1,100 mm x 4,500 mm x 1,500 mm tall


Item Ref: ND-13647-09
Details
N8358-09
William Boulton Pug Mill M/S 100Mm Dia
Extruder Type 100mm Pug 2 Stage.130mm.X 175mm.Mixer Feed.125mm.X 125mm.Extruder Feed With 100mm.Dia Auger.1.5 Kw Variable Speed Drive.
Item Ref: N8358-09
Details
RC1328-09
Gladstone SS Super Pugmill Extruder G75
Stainless Steel Jacketed Superpug Mill Designed to Masticate and Extrude Product Chamber 2 Off 75 mm Dia Augers X 750 mm Long Chamber Feed 250 mm X 150 mm with 60 mm Dia Discharge Point to fit Extruder Profile.   Adjustable Heat Source to Both Extruder Body and Discharge Cone with 5.5 kW 18 Rpm Geared Drive Motor with Inverter Speed Control.   Overall size of unit 750 mm X 1,800 mm X 1,700 mm Tall.
Item Ref: RC1328-09
Details