Liquiverter Mixer

LQV3000-63
3,000 L S/S Enc Intensive Liquiverter
New Stainless Steel Vertical Rectangular Vessel 1,350 mm X 1,350 mm X 1,750 mm On Straight with 450 mm Coned Bottom to 450 mm Dia Tangential Outlet to 75 mm Dia Connection.   Mounted on Stainless Steel Frame to give Ground Clearance to allow removal of Stirrer & Rotor Frame from tank if required [Without strip down from inside tank].  Radiused Top with Centre 460 mm Dia Manhole with Internal Safety Grid, Top with 6 Off Inlets to 50 mm Dia Connections and Breather to Suit. Made from 304 Grade Stainless Steel. With Bottom Entry Four Cup Bladed 350 mm Swept Dia X 155 mm Deep Rotor Dispersion Blade. Driven by 37 kW 1,440 Rpm Belt Driven Motor Mounted to One Side of Mixer Tank. With Bell Housing to Suit Bearings and Mechanical Seal Assembly fitted with Vertical Shaft to suit rotor location. [Control Panel Supplied At Extra Cost.]
Item Ref: LQV3000-63
Details
LQV2000-63
2,000 L S/S Enc Intensive Liquiverter
New Stainless Steel Vertical Rectangular Vessel 1,250 mm X 1,250 mm X 1,550 mm on Straight with 400 mm Coned Bottom to 400 mm Dia Tangential Outlet to 70mm Dia  connection.   Mounted on Stainless Steel Frame to give Ground Clearance to allow removal of Stirrer & Rotor Frame from Tank if required [Without strip down from inside tank].  Radiused Top with Centre 460 mm Dia Manhole with Internal Safety Grid, Top with 6 Off Inlets to 50 mm Dia Connections and Breather to suit. Made from 304 Grade Stainless Steel. With Bottom Entry Four Cup Bladed 300 mm Swept Dia X 120 mm Deep Rotor Dispersion Blade.  Driven by 30 kW 1,440 Rpm Belt Driven Motor Mounted to one side of  mixer tank. With Bell Housing to Suit Bearings and Mechanical Seal Assembly fitted with Vertical Shaft to suit Rotor Location. [Control Panel Supplied At Extra Cost.]
Item Ref: LQV2000-63
Details
LQV1200-63
1,200 L S/S Enc Intensive Liquiverter
New Stainless Steel Vertical Rectangular Vessel 1,000 mm X 1,000 mm X 1,200 mm On Straight with 300 mm Coned Bottom to 300 mm Dia Tangential Outlet to 50 mm Dia Connection.   Mounted on Stainless Steel Frame to give Ground Clearance to allow removal of Stirrer & Rotor Frame from Tank if required [Without Strip Down from Inside Tank].  Radiused Top with Centre 460 mm Dia Manhole with Internal Safety Grid, Top With 6 Off Inlets to 50 mm Dia Connections and Breather to suit. Made from 304 Grade Stainless Steel. With Bottom Entry Four Cup Bladed 200 mm Swept Dia X 100 mm Deep Rotor Dispersion Blade.  Driven by 18.5 kW 1,440 Rpm Belt Driven Motor Mounted to one side of Mixer Tank. With Bell Housing to suit Bearings and Mechanical Seal Assembly fitted with Vertical Shaft to suit Rotor Location. [Control Panel Supplied At Extra Cost.]
Item Ref: LQV1200-63
Details
LQV500-63
500 L S/S Enc Intensive Liquiverter
New Stainless Steel Vertical Rectangular Vessel 750 mm X 750 mm X 1,000 mm on Straight with 250 mm Coned Bottom to 250 mm Dia Tangential Outlet to 50 mm Dia connection.  Mounted on Stainless Steel Frame to give Ground Clearance to allow removal of Stirrer & Rotor Frame from tank if required [Without Strip Down from Inside Tank].  Radiused Top with Centre 460 mm Dia Manhole with Internal Safety Grid.  Top with 6 Off Inlets to 50 mm Dia Connections and Breather to suit. Made from 304 Grade Stainless Steel. With Bottom Entry Four Cup Bladed 150 mm Swept Dia X 65 mm Deep Rotor Dispersion Blade. Driven by 11 kW 1,440 Rpm Belt Driven Motor mounted to one side of Mixer Tank. With Bell Housing to Suit Bearings and Mechanical Seal Assembly Fitted with Vertical Shaft to suit Rotor Location. [Control Panel Supplied At Extra Cost.]
Item Ref: LQV500-63
Details
LQV250-63
250 L S/S Enc Intensive Liquiverter
New Stainless Steel Vertical Rectangular Vessel 630 mm X 630 mm X 750 mm On Straight with 200 mm Coned Bottom to 200 mm Dia Tangential Outlet to 50 mm Dia Connection.   Mounted on Stainless Steel Frame to give Ground Clearance to allow removal of Stirrer & Rotor Frame from tank if required [Without strip down from inside Tank]. Radiused Top with Centre 460 mm Dia Manhole with Internal Safety Grid. Top with 6 Off Inlets to 50 mm Dia connections and Breather to suit. Made from 304 Grade Stainless Steel. With Bottom Entry Four Cup Bladed 125 mm Swept Dia X 50 mm Deep Rotor Dispersion Blade. Driven by 7.5 kW 1,440 Rpm Belt Driven Motor Mounted to One Side of Mixer Tank. With Bell Housing to suit Bearings and Mechanical Seal Assembly Fitted with Vertical Shaft to suit Rotor Location. [Control Panel supplied At Extra Cost.]
Item Ref: LQV250-63
Details