Extruder

N10861-25
Reifenhauser Bitruder BT80 M/S Twin Screw Extruder

Mild Steel Twin Screw Counter Rotating Extruder 80mm Dia x 570mm long with 3 off Jacket zones with 60L feed hopper 570mm x 690mm x 550mm deep, with 0.5 to 38.1 kW variable speed approx 10 to 22 rpm.

Overall size 1,000mm x 3,300mm x 1,950mm tall.

Item Ref: N10861-25
Details
N10737-25
Colinex Single Screw Elec Extruder TPTC14/5

Single Screw Extruder with 32mm dia x 1000mm long auger 24 to 1 ratio with 5 off heated zones with hydraulic drive motor twin roll puller. Overall size 1900mm x 700mm x 1800mm tall 1000mm x 700mm x 1800mm tall with original control panel.

Item Ref: N10737-25
Details
N10833-25
Labotek Single Extrusion Line S/S 25mm Dia x 450mm long

Stainless Steel Extruder 25mm dia x 450mm long with 4 zone electric heat source with variable 0 to 25 RPM geared drive. With 100mm x 100mm x 900mm long water cooler trough to a 50mm wide x 550mm belt puller with 0.75 kw Carter variable 0 to 25 rpm drive. Overall size 450mm x 750mm x 800mm tall

Item Ref: N10833-25
Details
N8212-25
Iddon Single Screw Tool Steel Extruder
Type Wx 63mm Dia 22:1 Ratio Long Screw With 3-Stage Electric Heating Jacket To Discharge Plate.Driven By 3/18.5 Kw 97/25 Rpm Slip Ring Drive.Overall Size 3600 X 1100 X 1400 M/M Tall Complete With Control Panel.
Item Ref: N8212-25
Details