Feeders

Solitec Ms Proderite Lined Bin Activator

Mild Steel Proderite Lined With Vibratory Motors And Existing Feed Hopper 700mm Deep,Flange Mounted

K-Tron Soder Twin Screw Feeder Type T20

Key Features: 

S/S Chronos Richardson screw feeder 100mm dia x 1000 mm long

Flexicon Weigh Batching Premix System S/S

Stainless Steel 200L Powder feed hopper 910mm x 910mm x 900mm deep to feed Flexicon Spring Auger Conveyor mounted in polythene pipe section 100mm dia x 3200mm long.  Conveyor mounted on frame to give 2200mm of lift to feed 100L S/S Pre mixer tank mounted on load cells with 0.25 kW Lightnin mixer 1440 rpm with marine impellor. Tank size 400mm dia x 1000mm deep with cone base to 25mm dia  RJT outlet to Nemo pump discharge. Skid mounted. Overall size 1000mm x 3000mm x 3300mm tall.

New R-B 100Mm. Dia S/S Screw Extrudofeed

Stainless Steel Center Screw Feeder 100mm Dia X 800mm Long With 2 Off 100mm Dia X 600mm Face Side Feeder Roller Rotor Stainless Steel With 4 Off Scraper Arms 20mm Deep With 100mm Dia Right Angle Flanged Outlet. Fitted With S/S Feed Hopper 500mm X 600mm X 550mm Deep. With Top Flange. 0.37Kw Variable Speed Geared Drive. Mounted On Stainless Steel Bed Plate. Suitable For Mounting On Bench.

Conti Master Triple Feed Feeder

Mild Steel Unit Fitted With 3 Off 30L Feed Hoppers 300mm X 400mm X 300mm To 3 Off Rotary Valves 120mmm Dia X 60mm Face With Variable Speed Drives To 55mm Dia X 610mm Long Centre Discharge Auger Feed Screw With Variable Speed Discharge Gear Drive.

Penn Process Tec M/S Omega Volumetric Feeder

Mild steel Screw Feeder 50 mm dia x 500 mm long with 480 mm x 300 mm x 510 mm deep feed hopper to horizontal Auger 50 mm dia x 500 mm long mounted on a frame to feed a stainless steel discharge cyclone to pneumatically feed product overall size 840 mm x 550 mm x 1,400 mm tall made by Penn Process Tec M/S Omega Volumetric Helix Feeder model 2507 number 21450

Acrison Dry - Liquid Preparation Module

Stainless Steel Spiral Screw Feeder Model A1-105-0-6 25mm Dia X 500mm Long With V/Speed Geardrive Motor 0.37 Kw 48 Rpm Stainless Steel Feed Hopper 540mm X 600mm X 640mm Mounted Over 400L Dissolving Tank 1500mm X 600mm X 450mm Tall With 0.25 Kw Stirrer With Controller To Suit.

Pump Eng Dry & Liquid Preparation Module

Stainless Steel Spiral Screw Feeder 25mm Dia X 500mm Long With V/Speed Gear Drive Motor 0.37 Kw 48 Rpm. Stainless Steel Feed Hopper 540mm X 600mm X 640mm Mounted Over 200L Dissolving Tank 1500mm X 600mm X 450mm Tall With 0.25 Kw Stirrer With Controller To Suit.

Pump Engineering S/S Screw Feeder

Stainless Steel Spiral Screw Feeder 25mm Dia X 500mm Long With V/Speed Geardrive Motor 0.37 Kw 48 Rpm To Feed At A Rate Up To 850 Lph Stainless Steel Feed Hopper 540mm X 600mm X 640mm

New R-B 50Mm. Dia S/S Screw Feeder

50mm Dia 700mm Long Stainless Steel Screw Feeder With S/S Hopper 460mm X 300mm X 300mm Deep. 0.37Kw Variable Speed Geared Drive. Mounted On Stainless Steel Bed Plate. Suitable For Mounting On Bench.

R-B New 30 Mm Dia S/S Screw Feeder

All Stainless Steel Contact Parts With Stainless Steel Hopper 460 mm X 300 mm X 300 mm Deep. 0.37 Kw Variable Speed Gear Drive. 700 mm Long Screw Mounted On Stainless Steel Bed Plate. Suitable For Bench Mounting

Vibro Feeder S/S 590Mm X 2280Mm

Stainless Steel Bed 590mm Wide X 150mm Deep X 2280mm Long. Mounted On Mild Steel Frame With Hydraulic Drive (Probably Driver Southall).

Driver Southall Vibro Feeder S/S

S/S Vibro Feeder 600mm X 1830mm X 100mm Deep Trough With S/S Hopper. 7 Cu.M. Capacity 580mm X 1650mm X 770mm Tall. Mounted On Mild Steel Frame With Hydraulic Variable Speed Drive Control.

Cakewalk Feeder Table, Teflon Coated,S/S

855 mm Wide X 1840 mm Long X 120 mm Deep. Mounted In Mild Steel Frame To Give 1480 mm Ground Clearance. Made By Acme Sluis.

Driver Southall Vibratory S/S Feeder

Stainless Steel Hopper Feed To Trough 560 X 2000 X 70 M/M Deep With Hydraulic Vibrating Motor All Standing On Mild Steel Frame,Hopper Size 500 X 650 X 400M/M