Browse our used process plant listings by sub category:
Products in Agitator 135 Items
3,000L S/S Jktd Combination Mixer
Stainless Steel Chamber With Mild Steel Steam Jacket. 1600mm Dia X 1550mm Deep. Dish Bottom To 100mm Dia Outlet With 4 Off Centre-Mounted Paddle . Stainless Steel Bridge And Lid With Hinged Section Both Sides. 7.5 Kw 45 Rpm Paddle Stirrer And Off-Centre 15 Kw 1440 Rpm Sawtooth Dispersion Disc 200mm Dia . Made By Fag. Jacket Working Pressure 4 Bar
Item Ref: N9818-01
2,500L Greaves Combination Sawtooth Mixer
Stainless Steel Chamber with Mild Steel Jacketed Bowl 1,500mm Dia X 1,500mm Deep with 300mm Deep Cone to 100mm Dia Outlet. With Top Mounted 11 kW 28 rpm Flp Exd Iib T5 Rated Motor Scraped Anchor Paddle Stirrer and Top Mounted Hydraulic Raise Lower 20/4 kW 1,460/735 rpm Flp Exd Iib T4 Rated Motor Sawtooth Dispersion Mixer. Mounted In Mild Steel Frame.
Overall Size 2,600mm X 1,600mm X 3M Tall.
Previously Mounted with Extensions 1,200mm Tall to suit discharge.
Item Ref: N10100-03
2,000L Netzsch Mastermix Pmd M/S
Mild Steel Mixing Vessel. Vessel 1,600mm Dia X 2,100mm Deep with Slow Speed Anchor Type Base Mounted Stirrer 5.5 kW. Top Mounted Cavitation Disperser with 37 kW 1,440 rpm Motor Hydraulic Raise/Lower Disperser with 2.2 kW Raise/ Lower Hydraulic Power Pack.
Overall Height with Stirrer Closed 2,000mm X 2,200mm X 3,200mm Tall Height with Stirrer Open 5,000mm.
Item Ref: RC1176-03
2000L Millroom Fillworth M/S Jktd Mixer
Mild Steel Jacketed Vessel 1400mm Dia X 1400mm Deep. Radiused Bottom To Side 75mm Dia Outlet. Mounted To Give 1350mm Discharge Height. Fitted With Top Centre 22Kw 1470 Rpm Flp Shearhead Mixer With Mill Plate Base And Vortex Head. Jacket T.P. 40 Psi. W.P. 20 Psi. Fillworth Model Fm6-30Hp.
Item Ref: N9354-03
2000L S/S R&B Combination Mixer
Stainless Steel Rigal Bennett Combination Mixer Vessel 1320mm Dia X 1400mm Deep. Cone Bottom 225mm Deep To 100mm Dia Outlet With Top Entry Bridge Mounted 4 Kw 30 Rpm Stainless Steel Anchor, Fitted With Ptfe Hinged Scrapers With Off- Centre Mounted 7.5Kw 2880 Rpm Sawtooth Mixer Mounted On Mild Steel Structure To Raise And Lower Sawtooth Mixer Head Within The Vessel Unit. Mounted on a mild steel platform 2,200 mm x 1,600 mm x 630 mm working height overall height 3,550 mm [ Control panel can be supplied at extra cost]
Item Ref: ND-13523-03
1500L M/S Torrance Combination Mixer
Mild Steel Vessel 1160mm X 1500mm Deep With A Convex Base With 2 Off 50mm Dia Outlets. Dish Top With Centre 7.5 Kw 20 Rpm Scraped Anchor Paddle And Off- Centre 18.5Kw 1440 Rpm Sawtooth Mixer Mounted On Hydraulic Raise/Lower Stand To Give About 1000mm Of Lift. Overall Height When Closed 3900mm Tall.
Item Ref: N10505-01
Air Operated Stirrer & Raise Lower Stand
Approx 1200 mm Travel. Ideal For Drum Mixer Or Pump
Item Ref: S9886-03
1,000L S/S JKTD Vacuum Combination Mixer Raise Lower
1,000L S/S JKTD Vacuum Combination Mixer Raise Lower mounted on mild steel hydraulic raise lower frame, with centre mounted Tri Foil Mixer blades with anchor scrap arms with about 30 kw Belt gear drive with motorised Cone pullies to adjust speed range about 30 to 120 Rpm , with off centre auger mixer paddle 30 kw direct drive 1430 rpm. With Stainless Steel 304 grade mixer with one Vacuum rated mixer bowl 1,200 mm dia x 1,070 mm deep with 150 mm dia slipper outlet, mounted on portable fork lift base to give 1,350 mm height to flange to suit Vacuum lid . with 1.1 kw Busch Vacuum pump type RA 0063 F 503 0.1 mbar, With 9 Kw Tool-Temp TT-157-E Hot Water Heater Overall size 3,000 mm x 1,600 mm x 3,700 mm tall closed. 4,900 mm tall open height. With control panel to suit with start and for each motor
Item Ref: ND-13137-03
Silverson Shear Mixer Raise/ Lower Stand
- Manufactured by Silverson
- Stainless Steel
- Wheel Mounted
- Hydraulic Ram Attachement Points
- Overall Dimensions; Height 2,300mm x Width 1,000mm x Length 1,210mm
- Internal Width 880mm
- Reach 1000mm
- Mixing Fork Width 280mm
- Required Ram Length 1,200mm
Item Ref: ND-13803-03
600L S/S Sawtooth Mixer 7.5 Kw
Stainless Steel mixer tank 840mm Dia x 1220mm deep with shallow cone to 63mm Bsp out let with side mounting pads. with 7.5 Kw 1440 Rpm Sawtooth mixer mounted of centre with Hand Hydraulic Raise lower to give 650mm of lift overall height 2200mm.
Item Ref: N10938-03
High Lift Mobile 280 Kilo Stirrer Crane -Type H28HC-63
Mild Steel Frame With Hand Hydraulic Raise - lower Lift with Maximum Reach 1000 mm Reach. Travel of Hook 1,450 mm. with 1250 mm gap. Maximum height 3,556 mm
Item Ref: ND-13549-03
280Mm Dia S/S Marine Impeller
Stainless steel 316 grade to suit 1" dia shaft
Item Ref: ND-13943-03